Polycom TRAPEZE NETWORKS 1725-36060-001 User Manual
Page 7
Trapeze Networks: Mobility System for MP 422 Access Points
PN: 1725-36060-001_D.doc
7
Service profile commands (SSID & security policy setup)
WPA2-PSK
Assume you are creating service profile “vowlan-wpa2” to define the
ESSID “phones,” as well as a WPA2-PSK security policy. The
following commands are needed to setup the service for MP access
points:
set service-profile Voice ssid-name vowlan-wpa2
# sets the name of the service profile and SSID to
vowlan-wpa2
set service-profile Voice auth-fallthru last-resort
# specifies the authentication for the service
profile to open access
set service-profile Voice rsn-ie enable
# enables WPA2 security
set service-profile Voice cipher-tkip disable
# disables TKIP
set service-profile Voice cipher-ccmp enable
# enables AES / CCMP
set service-profile Voice psk-phrase <passphrase>
# defines a passphrase
set service-profile Voice auth-psk enable
# enables pre-shared key authentication
set service-profile Voice auth-dot1x disable
# disables 802.1x authentication
set service-profile Voice attr vlan-name default
# maps the handsets to the vlan named default
WPA-PSK
Assume you are creating service profile “vowlan-wpa” to define the
ESSID “phones,” as well as a WPA-PSK security policy. The following
commands are needed to setup the service for MP access points:
set service-profile Voice ssid-name vowlan-wpa
# sets the name of the service profile and SSID to
vowlan-wpa
set service-profile Voice auth-fallthru last-resort
# specifies the authentication for the service
profile to open access
set service-profile Voice wpa-ie enable
# enables WPA security
set service-profile Voice psk-phrase <passphrase>