Planet Technology FSD-504PE - Manual (Page 4)

ABOUT THIS GUIDE
Thank you for purchasing the FSD-504PE, 5-Port 10/100Mbps Fast Ethernet Switch with 802.3af
splitter built-in. This device integrates 100Mbps Fast Ethernet and 10Mbps Ethernet network
capabilities in a highly flexible desktop package and also offers dual power system, DC power and
IEEE802.3af in-line power over Ethernet.
Purpose
This manual discusses how to install your FSD-504PE. 5-Port 10/100Mbps Fast Ethernet Switch
w/802.3af splitter built-in.
Terms/Usage
In this manual, the term “Switch” (first letter upper case) refers to your 5-Port 10/100Mbps Ethernet
Switch, and ”switch” (first letter lower case) refers to other Ethernet switches. This manual
provides the information you need to install and configure the FSD-504PE
Overview of this User’s Manual
Chapter 1, Introduction: Describes the Switch and its features.
Chapter 2, Unpacking and Setup: Helps you get started with the basic installation of the Switch.
Chapter 3, Identifying External Components: Describes the front panel, rear panel and LED
indicators of the Switch.
Chapter 4, Connecting the Switch: Tells how you can connect the Switch to your Ethernet
network.
Appendix 5, Technical Specifications: Lists the technical (general, physical and environmental,
and performance) specifications of the Switch.
Appendix A, RJ-45 Pin Specification: Describes the RJ-45 receptacle/connector and the straight
and crossover cable connector.
Appendix B, Switch Operation: Describes how the switch works in details.
Appendix C, Troubleshooting: Describes some information for symptom could encountered.