Panasonic AG-3DA1P - Manual (Page 70)

70
Screen displays (continued)
24 Operation status display
REC: Recording
PAUSE: Recording standby
CHK: Rec check
: Playback
: Playback paused
( ) : Frame-by-frame playback
(Frame-by-frame reverse
playback)
( ) : Skip (reverse skip)
( ) : Fast forward/fast playback
(Rewind/fast reverse playback)
( ) :
High-speed forward (high-speed
rewind)
( ) : Paused in final scene (paused in
initial scene)
25 Monitor audio level meter
When you press the AUDIO MON/ADV
button, the sound volume output from the
built-in speaker and headphone jack is
displayed.
20 Gain display
Displays the gain value of the image amplifier
configured.
21 White balance information display
Displays the information on white balance.
P3.2 K/P5.6 K: Preset value
Ach/Bch: Value set to position A or B of
WHITE BAL switch
22 Screen mode display
Displays the current screen mode.
It is cancelled when the display status is
changed, for example, when a menu is
changed or REC CHECK is performed.
R-IMAGE: The image from the right lens is
displayed.
MIX: The images from the left and right
lenses are superimposed and displayed.
23 Remaining battery capacity display
The battery display will change
→ → → as battery
capacity decreases. will be displayed
in red when the battery is empty.
Remaining battery capacity may not be
displayed correctly with use at high or low
temperatures, or when the battery has
not been used for a long period of time.
To ensure that remaining battery capacity
is displayed correctly, use the battery
completely from a fully-charged state,
and charge the battery again. (Remaining
battery capacity may still not be displayed
correctly if the battery has been used for
long periods at high or low temperatures,
or if the battery has been recharged a large
number of times.)
The remaining battery capacity display is
a guideline and may change according to
usage conditions. •
•