Panasonic AG-3DA1P - Manual (Page 50)

50
You can add the video and audio systems, name
of the videographer, shooting location, text
memos and other information to the video data
you have recorded on the SD Memory Cards.
This data is called the clip metadata.
(Display method: Page 63)
There are two kinds of clip metadata: the data
that is recorded automatically during shooting,
and the data in the metadata upload file created
on the SD Memory Card which is loaded in the
unit.
(Loading method: Page 51)
Metadata can be produced with AVCCAM
Viewer. (Page 91)
When producing metadata using AVCCAM
Viewer, be sure to format SD Memory Cards
with this product and record the metadata on
the left-channel SD Memory Card.
What the clip metadata consists of
You can set the items underlined below
by loading the metadata upload file on the
SD Memory Card. All other items are set
automatically during shooting.
GLOBAL CLIP ID:
This indicates the global clip ID that shows the
shooting status of the clip.
USER CLIP NAME:
This indicates the name of the clip that the
user has set. * 1
VIDEO & AUDIO:
This indicates the recorded image’s FRAME
RATE, RESOLUTION, PULL DOWN * 4 system
and AUDIO.
ACCESS:
This indicates the CREATOR (name of
the person recording), CREATION DATE
(recording date), LAST UPDATE DATE (date
on which the data was last updated) and
LAST UPDATE PERSON (the person who last
updated the data).
DEVICE:
This indicates the MANUFACTURER
(manufacturer of the equipment), SERIAL NO.
(serial number of the equipment) and MODEL
NAME (equipment model name: AG-3DA1).
SHOOT:
This indicates the SHOOTER (name of the
•
videographer) and the PLACE NAME (name of
location).
LOCATION: * 4
This indicates ALTITUDE, LONGITUDE,
LATITUDE, and SOURCE (altitude, longitude,
latitude, information source).
SCENARIO: * 2
This indicates the PROGRAM NAME, SCENE
NO. and TAKE NO.
NEWS 1:
This indicates the REPORTER (name of the
reporter) and PURPOSE (purpose of data
collection).
NEWS 2:
This indicates the OBJECT (target of data
collection).
MEMO: * 3
This indicates the PERSON (name of the
person who recorded the text memo) and
TEXT (contents of memo).
* 1 If there is no information in the metadata
upload file, consecutive five-digit numbers will
be applied to the clips in the order that they
were recorded, with the first clip to be recorded
being given the number 0. The USER CLIP
NAME recording method is selectable. (Page
51)
* 2 When SCENARIO is to be input, you must
input the PROGRAM NAME. You cannot input
the SCENE NO. and TAKE NO. only.
* 3 When MEMO is to be input, you must input
TEXT. You cannot input PERSON only.
* 4 This information is not recorded with this unit.
Only printable ASCII characters can be
displayed by this unit.
Due to the limitations imposed by this unit
on the number of characters which can be
displayed, not all the data can be displayed.
(This does not mean that the data which is
not displayed has been deleted.) Use an
AVCCAM viewer or other program to check
all the data. •
•
Clip metadata