Panasonic AG-3DA1P - Manual (Page 51)

Shooting
51
Uploading the metadata (META
DATA)
You can perform any of the following operations.
If necessary, make preparations prior to
undertaking the operations.
Loading the metadata
Load the metadata recorded on the left-channel
SD Memory Card. (For details on contents of
the metadata, see the previous page.)
Selecting whether to record the metadata on
the SD Memory Cards
Initializing the metadata inside the unit
Displaying the metadata inside the unit
1
Press the mode button and select
CAMERA mode.
2
Press the MENU button.
Menu operation (Page 75)
3
Tilt the lever in the directions to select
META DATA, and push the Operation lever
(or tilt in the direction).
CAM MENU 2/2
DISPLAY SETUP
CARD FUNCTIONS
META DATA
OTHER FUNCTIONS
4
Tilt the Operation lever in the
directions to select item, and push the
Operation lever.
META DATA 1/2
CARD READ NO
RECORD OFF
USER CLIP NAME TYPE1
META DATA PROP NO
CLIP COUNT RESET NO
•
•
CARD READ:
Read metadata set to the SD Memory Card
with the camera.
Move to LOAD, push the Operation lever,
select whether or not to read the metadata
(YES/NO), and push the Operation lever
again.
Up to 10 items of metadata on the SD
Memory Card can be displayed, starting
from the most recent date of production.
If characters other than single-byte
alphanumeric characters are used in the
metadata file name to be loaded, they
are displayed as “∗”.
RECORD:
Select this to set whether to record the
metadata to be loaded into the unit
simultaneously on the SD Memory Cards.
Select ON to record the metadata or OFF to
cancel the recording, and push the Operation
lever.
The factory setting for this mode is OFF.
USER CLIP NAME:
The USER CLIP NAME recording method
is selectable. (For details: Page 5)
CLIP COUNT RESET:
Reset the counter value to 1.
Select whether or not to reset (YES/NO),
and push the Operation lever.
META DATA PROP:
Select this to display the metadata which
has been recorded in the unit.
META INITIAL SET:
Select this to initialize the metadata which
has been recorded in the unit.
Select YES to initialize the metadata or NO
to cancel the initialization, and push the
Operation lever.
5
Press the MENU button to release the
menu mode.
�
�