Panasonic AG-3DA1P - Manual (Page 52)

5
Clip metadata (continued)
Selecting the USER CLIP NAME
recording method
Press the MENU button and select META DATA
→ USER CLIP NAME to select the recording
method. Two options are available: TYPE1 and
TYPE.
USER CLIP NAME to be recorded
TYPE1 TYPE
If clip metadata has
been read in
Uploaded
data
Uploaded
data +
COUNT
value *
If no clip metadata
has been read in
or if the setting
for recording clip
metadata has been
turned off
Sequential 5-
digit number,
in order of
recording
Sequential 5-
digit number,
in order of
recording
* The COUNT value is indicated as a four-digit
number. The COUNT value is incremented
each time a new clip is captured if clip
metadata has been read in and TYPE has
been selected as the recording method.
The COUNT value can be reset using the
following procedure.
Press the MENU button, select META DATA→
CLIP COUNT RESET→YES, and push the
Operation lever to reset the counter value to 1.
YES
NO
CLIP COUNT RESET
CARD READ
RECORD
USER CLIP NAME
META DATA PROP
CLIP COUNT RESET