Panasonic AG-3DA1P - Manual (Page 53)

Shooting
53
Using the Counter
You can display a counter that indicates how
much time has elapsed during shooting or
playback.
1
Press the COUNTER button.
Each time you press the button, the display
changes as follows. (Page 68)
0 : 00. 00 (CAMERA mode only)
Counter value
CLIP 0 : 00 . 00
Displayed when CLIP is selected in the
REC COUNTER item on the settings menu
DISPLAY SETUP screen.
Values are automatically reset when
recording is started, and counter values are
displayed for each individual clip.
TC 12 : 34 : 56 . 01
Time code value
If SYSTEM FREQ is set to 59.9 Hz, time
code frame digits are displayed in 4
frames when 4P is set, and in 30 frames
when any other format is set.
If SYSTEM FREQ is set to 50 Hz, time
code frame digits are displayed in 5
frames.
UB 12 34 56 78
User information
No display
Data is not displayed.
Resetting the counter
Press the RESET button while the counter is
displayed.