Panasonic AG-3DA1P - Manual (Page 56)

56
Setting user information
Setting user information allows you to store 8-
digit information in the hexadecimal format.
User information is automatically saved in the
memory and retained after you turn off the power.
1
Set the POWER/Mode selector switch to
ON.
2
In the setup menus, TC/UB SETUP screen,
select UB PRESET.
Menu operation (Page 75)
TC/UB SETUP
TC MODE DF
TCG REC RUN
TC PRESET NO
UB PRESET NO
3
Tilt the Operation lever in the direction
to move to YES, and push the Operation
lever.
UB PRESET
TC MODE
TCG
TC PRESET
YES UB PRESET
NO
•
4
Set the user information.
Tilt the Operation lever in the directions
and select user information characters.
You can use numbers from 0 to 9 and
letters from A to F.
UB PRESET
UB 0 0 0 0 0 0 0 0
Tilt in the direction to move to the next digit,
and tilt in the directions again to select
character.
UB PRESET
UB F 0 0 0 0 0 0 0
You can reset the user information to nothing
by pressing RESET button.
RESET button
BARS SHUTTER
AUDIO
SPEED
INPUT
MIC POWER +48V
（R）
1 2
SEL
WFM RESET COUNTER
EVF DTL MIX ZEBRA
SELECT CH 2
INT ON
OFF INPUT 2
（L） INT
INPUT 1
INPUT 2
CH 1
5
Push the Operation lever when you have
finished setting the user information.
6
Tilt the Operation lever in the direction
to move to YES, and push the Operation
lever.
UB PRESET
UB
PRESET?
YES
NO
•
Charging the built-in battery/Setting the time code (continued)