Panasonic AG-3DA1P - Manual (Page 82)

8
Setup menu list (continued)
DISPLAY SETUP screen (continued)
Item
Display
mode
Description of settings
CARD &
BATTERY
(Camera) Select ON to display the remaining SD Memory Card recording capacity and
remaining battery charge.
ON OFF
OTHER
DISPLAY
(Camera) Select how much information to display on the viewfinder and the LCD
monitor. (Page 74)
ON OFF
LCD/EVF
BACKLIGHT
(Camera) Adjusts the backlight of the LCD monitor and viewfinder. Select HIGH for
brighter backlight.
LOW, NORMAL, HIGH
CARD FUNCTIONS screen
Item
Display
mode
Description of settings
CARD
FORMAT
(Camera) Formats the SD Memory Card.
YES: Formats the card.
NO: Returns to the last screen.
Be sure to insert the two SD Memory Cards. •
CLIP
PROPERTY
(PB) Displays information about the selected clip.
YES: Displays clip information.
NO: Returns to the last screen.
META DATA screen
Item
Display
mode
Description of settings
CARD READ (Camera) Loads the metadata recorded on the SD Memory Card into the unit.
YES NO
Be sure to insert the two SD Memory Cards.
“NO FILE” is displayed when no metadata is recorded in the SD Memory
Card.
•
•
RECORD (Camera) Sets whether to record the metadata to be loaded into the unit simultaneously
on an SD Memory Card.
ON: Records simultaneously.
OFF: Does not record simultaneously.
USER CLIP
NAME
(Camera) Selects the method of USER CLIP NAME recording.
TYPE1: User clip name is the same as the CLIP NAME if there is no
uploaded metadata or data.
TYPE2: User clip name is the same as the CLIP NAME if no combination of
data and COUNT value is uploaded, or if there is no uploaded data.
CLIP COUNT
RESET
(Camera) Resets the COUNT value to 1.
YES NO
META DATA
PROP
(Camera) Displays the metadata which has been recorded in the unit.
YES NO
META INITIAL
SET
(Camera) Initializes the metadata which has been recorded in the unit. All the settings
including the ON or OFF setting for RECORD are now cleared.
YES NO
indicates the factory setting.