Promise Technology FastTrak S150 - Manual (Page 17)

Chapter 2: Installation
13
Source Disk
Channel:ID Drive Model Capacity (MB)
----- ----- -----
Target Disk
Channel:ID Drive Model Capacity (MB)
----- ----- -----
[Please Select A Source Disk]
Channel:ID Drive Model Capacity (MB)
1 : SEAGATE S380023AS 80024
2 : SEAGATE S380023AS 80024
[↑] Up [↓] Down [ESC] Exit [Ctrl-Y] Save
4. Use the arrow keys to choose which drive contains the existing data to be
copied.
5. Press Ctrl-Y to Save selection and start duplication. The following progress
screen will appear.
Start to duplicate the image . . .
Do you want to continue? (Yes/No)
Y – Continue N - Abort
6. Select Y to continue. If you choose N, you will be returned to step 1.
7. Once complete, the following screen will appear confirming that your
Security array has been created. Press any key to reboot the system.
Array has been created.
<Press Any Key to Reboot>
8. Once the arrayed drives have been formatted, proceed to Chapter 4 of this
Manual to install your operating system and/or FastTrak driver.