Pioneer VSX-1325-K - Manual (Page 16)

Connecting your equipment 03
16
En
Note
• The input functions below are assigned by default to
the receiver’s different input terminals. Refer to The
Input Setup menu on page 39 to change the
assignments if other connections are used.
• The CU-RF100 omni-directional remote control
(separately sold) can be connected to the RS-232C
and EXTENSION terminals. Using the CU-RF100 lets
you display the receiver’s display information on the
remote control display in your hands and operate it
without worrying about obstacles or the direction in
which the remote control is pointing.
CAUTION
• Before making or changing the connections, switch
off the power and disconnect the power cord from the
power outlet. Plugging in should be the final step.
Input function
Input Terminals
Digital HDMI Component
DVD COAX-1 IN 1
BD (BD)
TV/SAT OPT-1
DVR/BDR OPT-2 IN 2
VIDEO OPT-3
HDMI 1 ( HDMI-1)
HDMI 2 (HDMI-2)
HDMI 3 ( HDMI-3)
HDMI 4 ( HDMI-4)
HDMI 5
(front panel)
( HDMI-5)
CD COAX-2
RS-232C
ANTENNA
AM LOO
EXTENSION
(OUTPUT
5 V
150 mA
MAX)
VSX-1325_UXJCB.book 16 ページ ２０１０年３月９日 火曜日 午後３時４分