Pioneer VSX-1325-K - Manual (Page 40)

Basic Setup 04
40
En
• Input Name – You can choose to rename the input
function for easier identification. Select Rename to
do so, or Default to return to the system default.
• Input Skip – When set to ON, that input is skipped
when selecting the input using INPUT SELECT. (DVD
and other inputs can be still be selected directly with
the input function buttons.)
• 12V Trigger1/2 (VSX-1325 only) – After connecting a
component to one of the 12 volt triggers (see
Switching components on and off using the 12 volt
trigger (VSX-1325 only) on page 36), select
MAIN,
ZONE 2, ZONE 3 or OFF for the corresponding trigger
setting to switch it on automatically along with the
(main or sub) zone specified.
1
7 When you’re finished, press RETURN.
You will return to the System Setup menu.
Input function default and possible settings
The terminals on the receiver generally correspond to the
name of one of the input functions. If you have connected
components to this receiver differently from (or in
addition to) the defaults below, see The Input Setup menu
on page 39 to tell the receiver how you’ve connected up.
The dots (
) indicate possible assignments.
Note
1 VSX-1325 only: Devices connected to 12 volt triggers can be associated with HDMI OUT switching. For details, see HDMI Setup on page 56.
Input
function Input Terminals
Digital HDMI Component
DVD COAX-1  a
a.With Control with HDMI set to ON, assignments cannot be made
(see Control with HDMI function on page 56).
IN 1
BD ( BD)
TV/SAT OPT-1  a 
DVR/BDR OPT-2  a IN 2
VIDEO OPT-3  a 
HDMI 1  ( HDMI-1)
HDMI 2 (HDMI-2)
HDMI 3 ( HDMI-3)
HDMI 4 ( HDMI-4)
HDMI 5
(front panel) ( HDMI-5)
INTERNET
RADIO
iPod/USB
XM b
b.XM Radio is only supported on the VSX-1325 only.
CD COAX-2
CD-R/TAPE 
TUNER
ADAPTER
PORT
SIRIUS 
VSX-1325_UXJCB.book 40 ページ ２０１０年３月９日 火曜日 午後３時４分