Panasonic KX-TDA0484 - Manual (Page 28)

2.2 Programming
28 Programming Guide
Parameter Descriptions
The parameters indicated with "*" must be changed while the VoIP Gateway Card is in the "STOP" status (see
"2.3.1 Status Control"). The changes do not have to be followed by a reboot to become effective.
Hunt Group
The parameters below are used to assign VoIP gateway ports 1 and 2 to the hunt groups.
For details, refer to "Detailed Explanations".
Hunt Pattern Entry
The parameters below are used to create hunt patterns.
For details, refer to "Detailed Explanations".
Parameter Default Value Range
* Port1 Hunt group 1 Hunt group 1,
Hunt group 2
* Port2 Hunt group 1 Hunt group 1,
Hunt group 2
Parameter & Description Default Value Range
* Hunt Pattern No.
Specifies the number for the hunt pattern to be created.
When changing the current settings of an existing hunt
pattern, first delete the hunt pattern and then re-create with
new values.
No default 1 to 16
* Receive Leading Number
Specifies the leading digits in received numbers by which to
determine the hunt group to direct incoming calls.
For example, to direct incoming calls with numbers starting
with "9", specify the number "9" in this parameter. Likewise,
to direct incoming calls with numbers starting with "1", specify
the number "1".
However, if you want to direct incoming calls with numbers
starting with "950" and "951" to separate hunt groups, it is
necessary to make 2 hunt patterns with respective numbers,
"950" and "951".
No default Max. 30 digits
* Hunt Group (Priority1)
Specifies the hunt group to which incoming calls are directed
first.
1 1, 2
* Hunt Group (Priority2)
Specifies the hunt group to which incoming calls are directed
when the VoIP gateway port assigned to Hunt Group
(Priority1) is busy.
- 1, 2, - (disable)