Remote control, Preparing the remote control – PYLE Audio PLD52MU User Manual
Page 10
Advertising
REMOTE CONTROL
9
Preparing the Remote Control
Face the remote control towards the player front face IR mark (remote control
receiver).
Operation angle: About
30 degree in each the direction of the front of the IR mark.
Inserting the Batteries
Using the Remote Control
1.First push to inside as the direction indicated by the arrow (See
)And then
Remove the battery holder as the direction indicated by the arrow (See
).
2.Replace the battery Set a new battery property with (+)side up as illustrated
(See
).
3.Insert the battery holder. Push in the holder to the original position(See
).
signal
To prevent damage to the unit, be sure to follow the connection diagram
(page 7).
1
2
3
4
Advertising