Panasonic PV-D4735S - Manual (Page 55)

55
*Important: If a remote control button does not work when pressed,
press the DVD button on the remote and try the button again.
PROGRESSIVE OUT
1
Press to select
“PROGRESSIVE OUT,”
and
press
SET repeatedly
for mode. (See below.)
2
OFF: Progressive scan signal is not output.
ON: Progressive scan signal is output from the
Component Video Output Connector.
Sets the Component Video Output Connector (p. 10, 13)
to output the Progressive scan signal.
3 Press ACTION
to exit this mode.
Press ACTION
to display DVD MAIN MENU.
• If the television is not progressive compatible, a
progressive scan picture is not available. Connect the
Video Output or S-Video Output connector (see p. 12,
13) and set PROGRESSIVE OUT to “OFF”.
• CONSUMERS SHOULD NOTE THAT NOT ALL HIGH
DEFINITION TELEVISION SETS ARE FULLY
COMPATIBLE WITH THIS PRODUCT AND MAY
CAUSE ARTIFACTS TO BE DISPLAYED IN THE
PICTURE.
IN CASE OF 525 PROGRESSIVE SCAN PICTURE
PROBLEMS, IT IS RECOMMENDED TO SET
PROGRESSIVE OUT TO “OFF”.
IF THERE ARE QUESTIONS REGARDING OUR TV
SET COMPATIBILITY WITH THIS MODEL 525p DVD/
VCR DECK, PLEASE CONTACT OUR CUSTOMER
SERVICE CENTER.
Notes
DVD Operation
SET
ACTION
SELECT