Planet Technology WAP-4033 - Manual (Page 2)

PLANET reserves the right to change specifications without prior notice. All brand names and trademarks are property or
their respective owners. Copyright©2005 PLANET Technology Corp. All rights reserved.
09-05 C-WAP4033-1
PLANET Technology Corporation
11, No. 96, Min Chuan Road, Hsin Tien, Taipei, Tawian R.O.C.
Tel: 886-2-2219-9518
Fax: 886-2-2219-9528
Email: [email protected] www.planet.com.tw
VoIP Gateway: vip.planet.com.tw
54Mbps Wireless Access Point WAP-4033
54Mbps Wireless Access Point Product
Specification
Applications
Ordering Information
Data Sheet
2
WAP-4033
Model
Standard
Transfer Rate
Modulation
Radio Technology
Antenna
Operating modes
Transmit Power
LAN Interface
Cabling
LED Indicators
Power
Temperature
Humidity
Dimension
Weight
Emission WAP-4033
IEEE 802.11g/802.11b (Wireless),
IEEE 802.3 (Wired)
802.11g: 54/48/36/24/18/12/9/6Mbps
802.11b: 11/5.5/2/1Mbps
OFDM@54Mbps, CCK@11/5.5Mbps,
DQPSK@2Mbps and DBPSK@1Mbps
Direct Sequence Spread Spectrum (DSSS)
Detachable dipole antenna
Access Point
Station - Ad-Hoc
Station - Infrastructure
Bridge - Point to Point
Bridge - Point to Multi-Point
Bridge - WDS
Universal Repeater
18dBm (Maximum)
1-port RJ-45, Auto-MDI/MDI-X
Category 5/5e or above, 4-pair
3; PWR, WLAN, LAN
12V DC, 500mA
0 ~ 55 degree C (Operating)
10 ~ 90%, non-condensing (Operating)
170 x 87 x 32 (mm)
162g
FCC class B, CE-mark
Enterprise or Campus Users
In an enterprise or campus area, some mobile users may need a continuous
network connection; by installing the WAP-4033, mobile users can always
surf on internet by installing a wireless card in their notebook or PDA. The
roaming capacity allows users to connect to the network to transparently
roam from one access point to another.
Wireless ISP
The first solution for distance in a mile is simple with PLANET’s wireless
devices. Being wireless is required and the provided bandwidth can be up to
54Mbps. By installing the WAP-4033 equipped with omni-directional antenna
in the user’s neighborhood, all users around the access point can be easily
connect to Internet through the access point if they also install a wireless PCI
card or a WAP-4033 in Client mode.
LAN to LAN or LAN to Multi-LAN
Wiring inside your own building perhaps is an easy job, however, it is hard if
network cabling needs to go through some public areas or difficult wiring
environments. The WAP-4033 can work in bridge or repeater mode to
provide a robust solution for connecting two or more buildings together.
WAP-4033 WAP-4033 WAP-4033 WAP-4033
WAP-4033
Internet
WAP-4033 WAP-4033
WAP-4033
WAP-4033
WAP-4033
WAP-4033