Panasonic TC-60PS34 - Manual (Page 44)

44
Settings Items Item Description
PC adjustments Reset to defaults Resets PC adjustments.
Sync H & V The H and V sync signals are input from the HD/VD connector. (p. 52)
On green Uses a synchronized signal on the Video G signal, which is
input from the G connector. (p. 52)
Dot clock Alleviates the problem if a picture appears to be vertically-striped, flickers partially or
is blurred.
H-position Adjusts the horizontal position.
V-position Adjusts the vertical position.
Clock phase Alleviates the problem if the whole picture appears to flicker or is blurred.
First adjust the Dot Clock to get the best possible picture, then adjust the clock Phase
so that a clear picture appears.
●
It may not be possible to display a clear picture due to poor input signals.
Input
resolution Switches to wide display.
●
VGA (640×480 pixels), WVGA (852×480 pixels), XGA (1,024×768 pixels),
WXGA (1,280×768 pixels)
●
Options change depending on signals
H-frequency
V-frequency Displays the H (Horizontal)/V (Vertical) frequencies.
Display range
Horizontal: 15 - 110 kHz
Vertical:
48 - 120 Hz
HDMI settings HDMI/DVI RGB
range (HDMI 1-3) Auto/
Standard
(16-235)/
Nonstandard Prevents the blown out highlights and blocked up shadows when
a wide-range signal is received. Selects between standard RGB
range (16-235 bits) or non-compliance (0-255 bits).
Auto: Switches the RGB range (Standard (16-235)/
Nonstandard) depending on the HDMI signal information.
Contents type
(HDMI 1-3) Off/Auto/Photo/
Graphics Sets content type to each HDMI input.
Auto: Switches content type automatically depending on the
HDMI signal information.
Photo: Best setting for JPEG viewing.
Graphics: Best setting for On-Screen display of connected
equipment.
• Some menus are grayed out depending on the input signal or condition.
(e.g. “3:2 pulldown” will be grayed out if the input signal is high definition or you are viewing photos, etc.)
Advanced
picture 3D Y/C filter Off/On Minimizes noise and cross-color in the picture.
Color matrix SD/HD Selects image resolution of component-connected devices.
SD: Standard Definition HD: High Definition
Only used with 480p video signal.
Block NR Off/On Reduces noise of specific digital signals of DVD, Cable box, etc.
Mosquito NR Off/On Reduces HDTV flicker noise in the contoured sections of an
image
Black level Dark/Light Selects Dark or Light. Valid only for external input signals.
3:2 pulldown Off/On/Auto Adjusts the picture recorded in 24 fps for optimum quality.
24p Direct in 60Hz/48Hz 48Hz: Achieves more cinematic playback by reproducing the
movie contents at twice the speed of 24 frames per second.