Pioneer VSX-9120TXH-K - Manual (Page 5)

5
Operations on the Receiver and Cable Connections
To display reverberation characteristics measured with the receiver on your PC, you need to connect the
receiver to the PC.
1
Connect the receiver to your PC with a RS-232C cable.
Caution
Before making or changing connections, switch off the power and disconnect the power cord from
the power outlet. Plugging in components should be the last connection you make with your system.
VSX-91TXH /
VSX-9120TXH
MULTI JOG MASTER
VOLUME
VSX-91TXH
PHONES
DVR 1/DVR 2 VIDEO/GAME CD CD-R / TAPE / MD FM/AM
SYSTEM SETUP TUNING/
STATION TUNER EDIT SPEAKERS RETURN TONE
MULTI JOG
MULTI CH IN SB ch PROCESSING SIGNAL
SELECT SIRIUS XM HDMI iPod
MCACC SETUP MIC DIGITAL IN AUDIO R L VIDEO VIDEO/GAME INPUT S - VIDEO
ON/OFF
Notes
• The type of cable to use is a female-female cross cable. Different manufacturers use different names
to refer to this type of cable. Sometimes it is called an “interlink” cable, and sometimes it is called a
“reverse” cable.
Pin-out diagram of RS-232C cable to connect receiver and PC
• The following cable has been proved to ensure system operation.
Dsub 9-pin female Dsub 9-pin female Dsub 9-pin female Dsub 9-pin female
Brand Cable Part NO.
Belkin Pro Series Serial Direct Cable-10 feet F3B207-10