Panasonic PT 61LCX65 - Manual (Page 35)

35
Basic Operation
Press SAP to select the next audio track (if
available) when receiving a digital channel.
Digital mode
Select Audio Mode for TV Viewing
Audio track 1 of 1
(English)
Analog mode
Press SAP button to select the desired audio
mode as described below.
(Arrow shows selection.)
• Each press of SAP button will change the audio
mode as shown below.
• “SAP” is selected with first press of SAP button.
SAP
SAP
STEREO
SAP
MONO
STEREO
SAP
MONO
Sleep Timer Feature
SLEEP
Press SLEEP repeatedly to select the
desired time.
• To cancel, press SLEEP repeatedly until 0
appears. Also, turning Power OFF while setting
SLEEP will reset to zero.
0
30
60
90
Switches the unit OFF in a preset amount of time from 0
to 90 minutes in 30 minute intervals.
The following are possible broadcast types with their
accompanying on-screen displays. The signal being
received is indicated with a red text while the se lect ed
audio mode is yellow back ground.
MTS Stereo and SAP broadcast
Multi-channel Television Sound Stereo (main
lan guage) and Secondary Au dio Program (sub
lan guage) broad casts are both be ing received
si mul ta ne ous ly. Select the STEREO or SAP audio
mode.
MTS Stereo broadcast
Multi-channel Television Sound Stereo broadcast.
Se lect STEREO audio mode.
• If stereo broadcast is weak and the display flickers, select
MONO audio mode for pos si bly better results.
SAP broadcast
Secondary Audio Program (sub language.)
Select SAP audio mode for the sub language.
MONO broadcast
Normal monaural sound broadcast.
Receivable Broadcast Types
Notes:
• Pressing RECALL with sleep timer set displays remaining
time. This can also be done by pressing SLEEP. If you
continue to press SLEEP, the sleep time setting mode will be
entered.
• Sleep time may also be set from the Menu screen. (P. 44).
• The on-screen display will flash 3, 2 and 1 to indicate the last
three (3) remaining minutes prior to turn off.