Pioneer PDP-435HDG - Manual (Page 57)

11 Useful Adjustment Settings
English
57
En
Color system setting (AV mode only)
If an image does not appear clearly, select another
color system (e.g., PAL, NTSC).
1 Press HOME MENU.
2 Press / to select “Option”, and then press
ENTER.
3 Press / to select “Color System”, and then
press ENTER.
4 Press / to select a video signal system, and
then press ENTER.
Color System
Auto
PAL
SECAM
NTSC
4.43NTSC
PAL-M
PAL-N
• You can select “Auto”, “PAL”, “SECAM”, “NTSC”,
“4.43NTSC”, “PAL-M”, or “PAL-N”.
• With “Auto” selected, input signals are
automatically identified.
5 Press HOME MENU to exit the menu.
• The factory default is “Auto”.
• You need to perform color system setting for each of
INPUT 1 to 4.
• For color system setting for each channel, see pages
31 and 32.
Adjusting image positions and clock
manually (PC mode only)
Usually you can easily adjust the positions and clock of
images using Auto Setup. Use Manual Setup to opti-
mize the positions and clock of images when neces-
sary.
1 Press HOME MENU.
2 Press / to select “Option”, and then press
ENTER.
3 Press / to select “Manual Setup”, and then
press ENTER.
4 Press / to select the item to be adjusted, and
then press ENTER.
Manual Setup
H/V Position Adjust
Clock
Phase
Reset
0
0
5 Press / (and / ) to perform adjustment.
• Use / only when you adjust the vertical
position after selecting “H/V Position Adjust”.
6 Press HOME MENU to exit the menu.
• To restore the factory defaults for all the items, press
/ to select “Reset” in step 4, and then press
ENTER. A confirmation screen appears. Press /
to select “Yes”, and then press ENTER.