PYLE Audio DISC CD CHANGE - Manual (Page 12)

ERROR DISPLAY
• Error 1: There's no Magazine, and DISC is clamping.
• Error 2: It is impossible to discharge Magazine while ejecting.
• Error 3: Loading is not completed after a certain time (8 sec) passed.
• Error 4: Unloading is not completed after a certain time (8 sec) passed.
• Error 5: Elevator does not reach to the target position after a certain time (8 sec)
passed. Hole separated.
• Error 6: Pickup is not moved to the center area even after a certain time (8 sec)
passed in movement of Sled center area.
• Error 7: It is not completed despite more than 3 time of Focusing trial.
• Error 8: CLV On is not operated to reach CLV constant speed Mode, and Subq
input is proven Error.
• Error 9: TOC is not read after a certain time (15 sec) passed.
• Error 10: The temperature in the mechanism continues to rise for a certain times (5
sec) so no more operation can be done.
Note:
- When the system is turned off in the car power always goes back to the radio, not
back to the CD player.
- When power is restored to the CD System. It does not start where it was last
playing. It always goes back to the number 1 song on the disc.
- If you want to play a CD, turn the system on via the commander or remote control.
If you want to listen to radio or cassette, turn power on via the radio.
88-D0020-26
www.pyleaudio.com