Panasonic AJ-D650 - Manual (Page 28)

Setup (setting) menus
USER menu
<BASIC> (continued)
Item Setting
No.
Description
Superimposed No. Superimposed
display display
002 CHARA 0000 0 This sets the position of the characters on the vertical plane
V-POS
0018 18
for the time code and other super displays output to the
VIDEO OUT 3 connector.
0022
<Note>
22
1. When setting this item, the DISPLAY SEL status is output to
VIDEO 3 even if SUPER OFF has been set. However, when
the menu is exited, operation complies with the SUPER
OFF/ON setting.
Also, CHARA TYPE is output to VIDEO 3 according to the
status set in the menu.
003 DISPLAY
SEL
2. When the DISPLAY SEL setting causes. characters to
extend beyond the edges of the screen, the setting value is
changed so that the characters are automatically displayed
in a position on the screen.
0000 TIME This selects what information is to be provided by the time code
0001
T&STA and other super displays output to the VIDEO 3 connector.
0002 T&S&M 0: Time only.
1: Time and status.
2: Time, status and mode.
<Note>
004 LOCAL
ENA
0000
0001
0002
The mode display is DVCPRO mode display during DVCPRO
format and DV mode display during DV format.
DIS This selects the buttons which can be operated on the front
ST&EJ panel when the REMOTE/LOCAL switch has been set to
ENA
REMOTE.
0: No buttons can be operated.
1: Only the STOP and EJECT buttons can be operated.
2: All buttons can be operated.
005 TAPE
TIMER
006 SUPER
007 CHARA
TYPE
0000
0001
0000
0001
0000
0001
±12h This selects the 12 or 24 hour display for the CTL counter.
24h 0: 12 hour display
1: 24 hour display
OFF This selects whether the time code and other super display
ON which are output to the VIDEO OUT 3 connector is to shown.
0: Not shown.
1: Shown.
WHITE This selects the display type for the super display output to
W/OUT the VIDEO OUT 3 connector as well as for displays such as
the setting menu, etc.
0: White characters against a black background.
1: White characters with a black border.
The underline on the setting item denotes the initial setting.
USER menu
<OPERATION>
No.
Item
Superimposed
display
101 SHTL MAX
Setting
No.
Superimposed Description
display
0000
0001
0002
×16 This sets the maximum speed for shuttle operations.
Ч32 0: 16Ч normal speed
Ч60
1: 32Ч normal speed
2: 60× normal speed
<Note>
During DV format, the maximum speed is 32× normal speed
even when 60× is selected.
The underline on the setting item denotes the initial setting.
– 2 8 –