Preparation – Panasonic D-SNAP SV-AS30 User Manual

Page 16

Advertising
background image

16

VQT0N05

≥ The battery is warmed during and after charging. The SD Multi

Camera is also warmed during the operation, however, it is not a
malfunction.

≥ When you do not use this unit, detach this unit from the USB cradle

and disconnect the AC mains lead from the electrical outlet.

1

Slide the Power Switch to [ON].

• This unit is turned off when you slide the Power Switch to [OFF].

Power/Charge/Card Access Lamp 1

• When the Power/Charge/Card Access Lamp is blinking, do not turn

the power off or do not remove the battery and the card. Otherwise,
the card or its contents may be damaged, or the SD Multi Camera
may not work properly.

• The Power/Charge/Card Access Lamp also blinks when charging the

battery with this unit attached to the USB cradle (P14).

Turning This Unit On

Lighting

This unit is turned on. (The Power/Charge/Card
Access Lamp is turned off when this unit is turned
off.)

Blinking

This unit is accessing to the card.
(For recognising/recording/reading/deleting, etc.)

1

Preparation

(continued)

VQT0N05Eng.book 16 ページ 2004年11月22日 月曜日 午前10時12分

Advertising