Powermatic HPS126 - Manual (Page 2)

HPS126-HPS67 Horizontal Panel Scoring Saw
The Gold Standard Since 1921.
Whether you need a full 10.5' cut on
long panels, or you have space constraints
yet still need the features of a big saw,
Powermatic has the right saw for you.
■
Both of these machines feature a generous
size sliding carriage assembly that travels
effortlessly on precision ball bearings
guided by hardened and ground support
rods. Heavy walled extrusions on both
the slider and support beam eliminate
distortion and twist found on some
machines. All carriage parts are hard
anodized to prevent marring of the
workpiece and insuring the life of the
parts.
■
Saw bodies of heavy steel plate
are full seam welded to provide a strong
platform and base leveling screws assure
an accurate installation. Crosscut tables
are box-welded components and cross
braces that are full seam welded to
prevent distortion, even with the heaviest
loads. A two position cross cut fence with
extension and dual flip stops make short
work of big jobs quickly and accurately.
■
The main table of cast iron supports the
rugged rip fence, which locks on a solid
steel guide bar. The rip fence features a
dual position fence body and has a micro-
adjust for precise cuts.
■
The main saw
unit consists of massive steel plate that
carries the main and scoring motors.
All rise/fall and tilting controls are fully
enclosed to prevent dust contamination.
Blades and riving knives are shrouded
under the table and have dust collection
and blade brushes to minimize nuisance
dust.
■
Other features include: Dual dust
collection ports, Overarm blade guards
with dust collection, Full size miter gage
with fence, extension, stock clamp and
flip stop. Auxiliary panel supports, Rear
out-feed extension table, Right side
extension table. Self-braking motors,
Independent external scoring adjustment
with separate switch. All this and a host
of other features are included.
■
The long
and short of it is: if you are working sheet
goods, Powermatic has the saw for you.
FEATURE
Saw body constructed of heavy
steel plate and full seam welded
Heavy walled extra-wide carriage
assembly travels on ball bearings
and hardened steel ways
7 1 /
2
HP main and 3 /
4
HP scoring
motors mounted on massive
steel plate
Auxiliary stock rollers on crosscut
carriage and ripping position
Extra long dual position crosscut
Auxiliary long stock squaring
attachment travels on rail
Swing away guard with 4-inch
dust port
Both blades shrouded and
Includes blade brushes
Easy access controls
BENEFIT
Basis for a rock solid platform and
insures accuracy of machine
Eliminates distortion of carriage under
load and glides effortlessly through
the cut
Assures constant alignment with no
deflection for excellent cutting results
Ease of handling large workpieces
Accurate crosscuts in any position
and ease of handling
Allows user to square long work while
using carriage
Fast tooling changes and a clean
work environment
Exceptional dust collection with
minimized noise
Fast set-ups for blade adjustments
Large sliding table with
heavy duty panel carriage
has a 47 " miter fence
with flip stop and clamp.
Crosscut fence has dual
stops with magnifying
cursor. Control console with
Star/Delta motor starter,
Independent scoring
control and lighted blade
speed indicator are
easily accessed from
the operator position. Main blade raising/
lowering controls,
Scoring blade height/
lateral controls, Dual
position rip fence with
Micrometer adjustment.
HPS126 HORIZONTAL PANEL SCORING SAW