PYLE Audio PLM4135BT - Manual (Page 2)

1 Specification: 1 Specification:
1 Display Size:
2 Display:
3 Resolution:
4 Brightness:
5 Contrast:
6 Visual Angle:
7 Chromatic System:
8 Working Power:
9 Working Current:
10 Operation temperature:
11 Input Port:
4.2Inch;
TFT LCD 16:9Panel;
320
RGB 234;
400;
250;
145;
NTSC/PAL(Auto Switch);
12V;
500mA;
0-45;
One Video Input
One Camera Input;
2 Features: 2 Features:
1 Type of Car:Saloon Car Business Car Minitype Truck;
2 Installation Measure:Can be Instead of the origin Rearview Mirror
Directly;
3
Special Customized Lens in order to be Consistent with the Rear-
view Image;
4
Auto switch to Rearview system when backing a car to insure the
safety.
1 Pay Attention to the Polarity when connecting in case of damaging
the machine;
2
Do not Dismantle the machine because of its high exactitude, If
you have some problem;
Please contact with current Distributor.
3
Do not use the cleanser of other impregnate to clean the lens and
that you can use soft cloth bumf.
4
Avoiding Being laid the machine below the Sunshine,Dust,Hum-
idity;
5
It is common theat appear few luminosity in panel;
6 The chromatic system of the camera matched with machine is
NTSC system,so in order to avoiding frequently switching display
chromatic system,please enact the Chromatic system of DVD or
VCD to be NTSC.
3 Caution: 3 Caution:
1 After the unit is ON, the BLUETOOTH signal light flashes
every 5 seconds. First connect your cell phone to the unit, pass-
word of unit is 8888 . After successful connection, the BLUET-
OOTH light remains constantly on.Incoming call numbers will be
displayed on the LCD. (Due to function limit of some cell phon-
es, the number cannot be displayed. However, user still can ans-
wer the incoming calls.) Press the BLUETOOTH button on front
panel once to answer calls.
2 When dialing calls, you could speak directly once the other
party has accepted the call. Keep the distance no farther than 1
meter from the microphone on front panel for best result.
4. There is a BLUETOOTH antenna at the back of the unit, keep
it away from GND connection in order to avoid dialing and
receiving problems.
5.After phone connection is successful,if conversation is private,
press and hold BUETOOTH for 3 seconds to switch to cell phone
connection.
6.After cell phone connects to BLUETOOTH,press the BLUE-
TOOTH button twice to dial back the last number you have
dialed.
3. Once your cell phone is connected to the unit, you no longer
have to connect again even the power is turned OFF and ON
again. (If connection to the unit is failed, please Refer to the cell
phone manual for BLUETOOTH connection instruction).
BLUETOOTH Annotate
-1- -4-