Panasonic DMC-FZ50 - Manual (Page 116)

Connecting to other equipment
116
VQT0X92
w Single picture
1 Press  to select
[SINGLE PICTURE] and then
press
[MENU/SET].
2 Press   to select the picture
and then press .
• The message disappears in about
2 seconds.
3 Press to select [PRINT START]
and then press [MENU/SET].
• Press [MENU/SET] to cancel printing.
4 Disconnect the USB connection
cable after printing.
w Setting date printing, the number of
prints, the paper size and the page
layout
Select and set each item in step 3 .
• Items not supported by the printer are
displayed in gray and cannot be selected.
• When you want to print pictures in a paper
size or a layout which is not supported by
the camera, set [PAPER SIZE] or
[PAGE LAYOUT] to [
] and then set the
paper size or the layout on the printer. (For
details, refer to the operating instructions
of the printer.)
• [PRINT WITH DATE]
• If the printer does not support date
printing, the date cannot be printed on the
picture.
• [NUM. OF PRINTS]
Set the number of prints.
• [PAPER SIZE]
(Paper sizes that can be set with this unit)
The paper sizes are displayed on pages
1/2 and 2/2. Press
 to select.
_These items cannot be displayed when
the printer does not support the paper
sizes.
• [PAGE LAYOUT]
(Layouts for printing that can be set with
this unit)
SELECT SET
DPOF PICTURE
SINGLE PICTURE
PictBridge
MENU
SET
MENU
PLEASE SELECT
THE PICTURE TO PRINT
PictBridge
1 / 3
100_0001
EXIT
SELECT
PRINT
MENU
OFF
SINGLE PICTURE
NUM. OF PRINTS 1
PRINT WITH DATE
PAPER SIZE
PAGE LAYOUT
SELECT CANCEL EXIT MENU
PRINT START
SET
MENU
Settings on the printer are
prioritized.
[OFF] Date is not printed.
[ON] Date is printed.
1/2
Settings on the printer are
prioritized.
[L/3.5 SM5S] 89 mm M127 mm
[2L/5 S M7S] 127 mm M178 mm
[POSTCARD] 100 mm M148 mm
[A4] 210 mm M297 mm
2/2 _
[CARD SIZE] 54 mm M85.6 mm
[10 M15cm] 100 mm M150 mm
[4 S M6S] 101.6 mm M152.4 mm
[8 S M10S] 203.2 mm M254 mm
[LETTER] 216 mm M279.4 mm