Panasonic DMP-BDT110 - Manual (Page 12)

12
VQT3B58
STEP 4 : Connecting to
an AC power source
≥ This unit consumes a small amount of AC power (“Quick
Start”: “Off”, approx. 0.1 W) even when turned off. In the
interest of power conservation, if you will not be using this
unit for an extended period of time, it can be disconnected.
STEP 5 : Settings
After connecting your new player for the 1st time and
pressing the power button, a screen for the basic settings
will appear.
Preparation
Turn on the television and select the appropriate video
input on the television.
1
Press [Í POWER].
Setup screen appears.
If this unit is connected to a Panasonic TV (VIERA)
supporting HDAVI Control 2 or later via an HDMI cable,
then setting information on the TV such as “On-screen
Language” is acquired by this unit.
2
Follow the on-screen instructions and
make the settings with [3, 4] and press
[OK].
After completing “Easy Setting”, you can perform “Network
Easy Setting”.
≥ You can perform this setup anytime by selecting “Easy Setting” in the
Setup menu. ( 33)
Touch Free Sensor [BDT210]
By setting “Sensor” in “Touch Free Sensor” to “On”, you can open or close
the tray just by waving your hand over the TOUCH-FREE SENSOR on the
upper side of the unit. (This will also work when in stand-by.)
≥ Be aware that the TOUCH-FREE SENSOR may function unintentionally
in the following cases:
– When your hand or arm, an object, a small child, or a small animal
comes close to the upper part of the unit
– When an object is placed on top of the unit and vibration is applied
– When connecting a cable etc. to the rear of the unit
≥ Reactive distance of the sensor is automatically set in accordance with
the installation conditions at the time of power supply connection and
when the open/close button is pressed. To prevent an incorrect setting,
do not place your hands or objects above the unit at these times.
≥ Depending on the usage conditions, the TOUCH-FREE SENSOR may
stop working or the reactive distance may become shorter. In such
cases, press the tray open/close button once.
Install this unit so that the power cord can be unplugged from the
socket outlet immediately if any problem occurs.
LAN
10BASE-T/100BA
COMMUNICATION
CAMERA
AC power supply cord
(supplied)
To a household AC outlet
Easy Setting
VQT3B58~Body_eng.fm 12 ページ ２０１０年１２月１０日 金曜日 午後９時１分