PYLE Audio SOUNDPOINT IP 450 - Manual (Page 43)

Using the Basic Features of Your Phone
3 - 3
To place a call using Hands-Free Speakerphone mode:
>> Do one of the following:
— With the handset on-hook, press
, , or the
NewCall soft key to obtain a dial tone.
Dial the number using the dial pad.
— With the handset on-hook, dial the number using the dial pad.
Press , , or the Dial soft key.
To place a call using the headset:
>> Do one of the following:
— With the optional headset connected, press
or the
NewCall soft key to obtain dial tone.
Press .
Dial the desired number using the dial pad.
— With the optional headset connected, dial the desired number using
the dial pad.
Press .
Note You can also dial using the SIP URL or IP address. To obtain the IP address of your
phone, press the Menu key, and then select Status > Platform > Phone. The IP
address is listed together with other phone information. The maximum URL or IP
address length is 32 characters. For example, 10.3.0.42, sip:[email protected] .
Press the URL soft key and enter the URL or IP address. Use * for “.” and # for “@”.
Then press the Send soft key to complete the call.
Your phone may not support SIP URL or IP address dialing. Contact your system
administrator.
Note If “Handsfree mode disabled” appears on the screen after you press the
speakerphone key
,
your system administrator has disabled the speakerphone on
your phone.
Note To permanently enable your headset, refer to Enabling the Headset Memory Mode
on page 2-6 .