The sleep timer, N =========== ] n, N , === ] n – Panasonic RX-ES23 EN User Manual

Page 13

Advertising
background image

13

RQT7912

To turn the timer on

[4] Press [

PLAY/REC] to display the timer

indicator.

Each time you press the button:

PLAY: to turn the play timer on

REC: to turn the record timer on

(The indicator does not appear if the start and finish times

have not been set.)

“E” appears if the clock has not been set.

[5] Press [

] to turn the unit off.

The unit must be off for timer to operate.
The record timer comes on about 30 seconds earlier than
the set time.

* While the unit is in standby mode and connected to the

household mains socket.

To change the settings (when unit is on)

You can enjoy your desired source after you have set the
timer.
Turn the unit off before the timer’s start time.

Note:

The play and record timers cannot be used together.

The Sleep Timer

Remote control only

You can set the unit to turn off after certain time. (e.g. when you
want to fall asleep while listening to music.)

Press [SLEEP] to select the time (minutes).

Each time you press the button:

Notes:

You can use sleep timer in combination with play and record
timer.

Make sure the unit is off before the play and record timer’s
start time.

Sleep-off time shall have higher priority than timer-off time.

To

Operations

cancel the timer

Press [

PLAY/REC]. (

l A)

check the settings*

Press [CLOCK/TIMER]. (

l B)

A

: When the unit is on to clear the timer indicators from

the display. (The timer comes on at the set time
everyday if the timer is on.)

B

: The settings are shown in the following order:

Start time

> Finish time > Music source > Volume

> Original display

To

Operations

change the times

Do steps

[1], [2], [3] and [5].

change the source or
volume

1 Press [

PLAY/REC] to clear

the timer indicator.

2 Make changes to the source or

volume.

3 Do steps

[4] and [5].

No display (OFF)

#

#

]

n

===========

]

n ,

=====

PLAY

REC

To

Operations

cancel

Press

[SLEEP]

to select

SLEEP OFF”.

check the remaining
time

Press

[SLEEP]

once.

The remaining time is shown for
about 5 seconds.

change the setting

Press

[SLEEP]

to select the new

time.

SLEEP 120

SLEEP OFF

#

SLEEP 90

SLEEP 60

SLEEP 30

#

#

]

n ,

===

]

n

,===

E_EB_GN_RQT7912-B.book 13 ページ 2004年12月8日 水曜日 午後4時15分

Advertising
This manual is related to the following products: