Panasonic COMPACT SC-HC25 - Manual (Page 6)

RQTX1249
6
E
N
G
L
IS
H
ENGL
ISH
Discs
Playing discs
1
Press [CD x, OPEN/CLOSE] on the main unit to open the
sliding door.
Put in a disc with the label facing towards you.
Press [CD x, OPEN/CLOSE] again to close the sliding door.
2
Press [CD] and then press [4/9] to start playback.
Keep fingers away from the sliding door when it is closing.
Stop playback Press [8] during playback.
Pause
playback Press [4/9] during playback.
Press again to continue playback.
Skip album
Press [R, T].
Skip track Press [2] or [6] (main unit: [2/3] or
[5/6]).
Search
through track
Press and hold [3] or [5] (main unit:
[2/3] or [5/6]).
Playmode function
1
Press [PLAY MENU] to select “PLAYMODE”.
2
Press [Y, U] and then press [OK] to select the desired mode.
OFF
PLAYMODE Play all tracks.
1-TRACK
1TR
Play one selected track on the disc.
Press the numeric buttons to select the track.
Playback starts from the selected track.
1-ALBUM
1ALBUM
Play one selected album on the disc.
Press [R, T] to select the album.
RANDOM
RND
Play a disc randomly.
1- ALBUM
RANDOM
1ALBUM RND
Play all tracks in one selected album randomly.
Press [R, T] to select the album.
Note:
• During random playback, you cannot skip to tracks which have been
played or press the numeric buttons.
• This function does not work with “Program playback”.
• The setting returns to default “OFF PLAYMODE” when you open the
sliding door.
Repeat playback
You can repeat “Program playback” or other selected “Playmode
function”.
1
Press [PLAY MENU] to select “REPEAT”.
2
Press [Y, U] to select “ON REPEAT” and then press [OK].
“ ” is shown.
To cancel, select “OFF REPEAT”.
Click!
Program playback
This function allows you to program up to 24 tracks.
1
Press [PROGRAM] in the stop mode.
“PGM” is shown.
2
Press the numeric buttons to select the desired track.
Do this step again to program other tracks.
3
Press [4/9] to start playback.
1 Press [PROGRAM] in the stop mode.
2
Press [R, T] to select the desired album.
3
Press [6] and then press the numeric buttons to select the
desired track.
4 Press [OK].
Do steps 2 through 4 again to program other tracks.
5 Press [4/9] to start playback.
Cancel
program mode Press [PROGRAM] in the stop mode.
Replay the
program Press [PROGRAM] and then press [4/9].
Check
program
contents Press [2] or [6] when “PGM” is shown in the
stop mode.
To check while programming, press [PROGRAM]
two times after “PGM” is shown, then press [2]
or [6].
Clear the last
track Press [DEL] in the stop mode.
Clear all
programmed
tracks Press [8] in the stop mode. “CLR ALL” is shown.
Within 5 seconds, press [8] again.
Note:
The program memory is cleared when you open the sliding door.
Viewing available information
You can view the available information on the display panel.
Press [DISPLAY].
Note:
• Maximum characters that can be shown: approximately 30
• This system supports ver. 1.0, 1.1 and 2.3 ID3 tags.
• Text data that the system does not support can show differently.
SC-HC25_P_en_sp.indd 6 SC-HC25_P_en_sp.indd 6 2/10/2011 5:20:21 PM 2/10/2011 5:20:21 PM