Pioneer VSX-522-K - Manual (Page 33)

Home Menu 6 6
33
The Pre Out Setting
Specify either using the surround back speaker or the front
height speaker connection with the PRE OUT SURR BACK/
FRONT HEIGHT
outputs. An additional amplifier is required
for the speaker connection.
• Default setting: Surr. Back
1
Select ‘Pre Out Setting’ from the Home Menu.
2
Select which speaker to connect to the PRE OUT SURR
BACK/FRONT HEIGHT outputs using
/ .
• Surr. Back – Connect the surround back speaker.
• Height – Connect the front height speaker.
3
When you’re finished, press RETURN .
You return to the Home Menu.
The Auto Power Down menu
Set to automatically turn off the receiver after a specified time
has passed (when the power has been on with no operation
for several hours).
• Default setting: OFF
1
Select ‘Auto Power Down’ from the Home Menu.
2
Specify the amount of time to allow before the power
is turned off (when there has been no operation).
• You can select 2, 4 or 6 hours, or OFF (if no automatic
shutoff is desired).
3
When you’re finished, press RETURN .
You return to the Home Menu.
Important
• If the Standby Through of the HDMI Setup is not set to
OFF
, the Auto Power Down setting will automatically be
set to OFF and cannot be changed.
The FL Demo Mode menu
Set whether or not various demos are to be shown on the front
panel display.
1
Select ‘FL Demo Mode’ from the Home Menu.
2
Choose ON or OFF for the demo display.
3
When you’re finished, press RETURN .
You return to the Home Menu.
The HDMI Setup menu
If your TV supports an audio return channel (ARC) function,
connect your TV and this unit with an HDMI cable and the TV
audio will be inputted into this unit via the HDMI terminal
without the need for an audio cable to be connected.
It is possible to transfer signals from an HDMI connected
player to the TV even when this receiver’s power is on standby.
Important
• Use a High Speed HDMI ® Cable when using the ARC
function. The ARC function may not operate properly with
other HDMI cables.
1
Select ‘HDMI Setup’ from the Home Menu.
2
Choose the ‘ARC’ setting you want.
When a TV supporting the HDMI Audio Return Channel
function is connected to the receiver, the sound of the TV
can be input via the HDMI terminal.
• ON – The TV’s sound is input via the HDMI terminal.
• OFF – The TV’s sound is input from the audio input
terminals other than HDMI inputs.
3
Choose the ‘Standby Through’ setting you want.
When the receiver is in standby, the HDMI input signal
selected here will be output to the TV by HDMI.
• LAST – The HDMI input signal selected previously will
be output.
• BD , DVD, SAT/CBL, GAME – The HDMI input signal
selected here will be output.
• OFF – Signal will not be output during standby.
- If the Standby Through setting is not set to OFF, the
power consumption during standby will increase.
The Auto Power Down setting will also be
automatically set to OFF.
H o m e M e nu
1 . Auto MCACC
2.Manual SP Setup
3.Input Assign
4.Pre Out Setting
5.Auto Power Down
6.FL Demo Mode
7.HDMI Setup
R e t u r n
4.Pre Out Setting
Return
Pre Out Surr. Back
H o m e M e nu
1 . Auto MCACC
2.Manual SP Setup
3.Input Assign
4.Pre Out Setting
5.Auto Power Down
6.FL Demo Mode
7.HDMI Setup
R e t u r n
5.Auto Power Down
Return
OFF
H o m e M e nu
1 . Auto MCACC
2.Manual SP Setup
3.Input Assign
4.Pre Out Setting
5.Auto Power Down
6.FL Demo Mode
7.HDMI Setup
R e t u r n
6.FL Demo Mode
Return
FL Demo ON
H o m e M e nu
1 . Auto MCACC
2.Manual SP Setup
3.Input Assign
4.Pre Out Setting
5.Auto Power Down
6.FL Demo Mode
7.HDMI Setup
R e t u r n
7.HDMI Setup
Return
ARC OFF
Standby Through [ O F F ]