Panasonic AWCB400N - Manual (Page 18)

18
MATRIX G GAIN –127 to +127 0
MATRIX G PHASE –127 to +127 0
MATRIX G_Cy GAIN –127 to +127 0
MATRIX G_Cy PHAS –127 to +127 0
MATRIX Cy GAIN –127 to +127 0
MATRIX Cy PHASE –127 to +127 0
MATRIX Cy_B GAIN –127 to +127 0
MATRIX Cy_B PHAS –127 to +127 0
MATRIX B GAIN –127 to +127 0
MATRIX B PHASE –127 to +127 0
GAMMA 0.35 to 0.55 0.45
KNEE POINT DYNAMIC, 88%
88% to 98%
WHITE CLIP 95% to 110% 110%
FLARE R 0 to 100 0
FLARE G 0 to 100 0
FLARE B 0 to 100 0
BLACK STRETCH OFF, ON OFF
CLEAN DNR OFF, LOW, HIGH OFF
3D-DNR OFF, LOW, MID, HIGH OFF
2D-LPF OFF, LOW, HIGH OFF
FIELD/FRAME FIELD, FRAME FIELD/FRAME
COMPONENT R/G/B , Y/Pb/Pr, Y/C Y/Pb/Pr
DIGITAL EXTENDER OFF, ON OFF
ZEBRA INDICATOR OFF, ON OFF
ZEBRA LEVEL 70% to 110%
SAFETY ZONE 1, 2, 3, 4, 5, OFF 4
EVF OUTPUT Y, CVBS CVBS
Item Setting Initial value
❈ Concerning the camera setting items
The functions that can be controlled vary depending on the camera connected.
If a camera does not support a particular function, its setting will not take effect even if that function appears on the menu.
For details on the functions featured by a specific camera, refer to the camera’s instruction manual.
Menu settings