Panasonic AW-HB505 - Manual (Page 9)

-7-
o Camera Control Input Connector [TO CONTROL
PANEL, CAMERA CONTROL IN]
Connect it to Camera Control Input Connector [CAM-
ERA CONTROL OUT] on the multi hybrid control panel
with a coaxial straight cable (5C-2V or equivalent),
which may be extended up to 10 meters.
!0 Pan/tilt Control Output Connector [TO CAMERA
PAN/TILT HEAD, PAN/TILT CONTOROL OUT] (RJ-
45 8-pin Modular Jack)
Connect one of [1] to [5] Pan/tilt Control Output
Connectors to Pan/tilt Control Input Connector [P/T
CONTROL IN] on the corresponding camera and
pan/tilt head with a 10BASE-T straight cable (UTP cat-
egory 5 or equivalent). The maximum allowable cable
length is 500 meters.
!1 Video Input Connector [TO CAMERA PAN/TILT
HEAD, VIDEO IN] (BNC Connector)
Connect one of [1] to [5] Video Input Connectors to
Video Output Connector Connector [VIDEO OUT] on
the corresponding camera and pan/tilt head with a
coaxial cable (5C-2V or equivalent). The maximum
allowable cable length is 500 meters.
!2 Genlock Output Connector [TO CAMERA PAN/TILT
HEAD, G/L OUT] (BNC Connector)
Connect one of [1] to [5] HEAD G/L OUT Connectors
to Genlock Signal Input Connector [G/L IN] on the cor-
responding camera and pan/tilt head with a coaxial
cable (5C-2V or equivalent). The maximum allowable
cable length is 500 meters.
!3 Camera Control Output Connector [TO CAMERA
PAN/TILT HEAD, CAMERA CONTROL OUT]
Connect one of [1] to [5] Camera Control Output
Connectors to Camera Control Signal Input Connector
[CAMERA CONTROL IN] on the corresponding cam-
era and pan/tilt head with a coaxial cable (5C-2V or
equivalent). The maximum allowable cable length is
500 meters.
!4 S-Video Output Connector [S-VIDEO OUT] (4-pin S-
Connector)
The luminance (Y) and chrominance (C) signals of the
corresponding camera are output from one of [1] to [5]
S-Video Output Connectors. Connect it to a monitor or
an S-VHS VCR for V-video input.
!5 Video Output Connector [VIDEO OUT]
(BNC Connector)
The video signals of the corresponding camera adjust-
ed by the cable compensation circuit and CABLE
COMP Y and C Controls
e and r in the correspond-
ing pan/tilt head are output from one of [1] to [5] Video
Output Connectors. Connect a monitor, special effect
generator (SEG), or VCR, for example, to it with a
coaxial cable for video input.