Precision Power PC4200 - Manual (Page 3)

BACK TO CONTENTS
Your new amplifier incorporates some or all of the following features:
Adaptive MOSFET Switching Power Supply
Fully Complementary Darlington Output Stage
AP III Protection Circuitry (PC4200, PC4400, PC6800)
AM IV Protection Circuitry (PC4800)
QBASS™ Bass Boost (PC4200, PC4400)
QBASS PLUS™ (PC4800, PC6600)
QBASS REMOTE™ Compatible (PC4800, PC6600)
PowerLock Speaker and Power Wire Connectors
Detented, Variable 3-way Internal Crossover
Non-Fading Sub Channel
Balanced Differential Input Stage
High Voltage Input Capability with Input Attenuation Switch
Gold Plated RCA Input and Output Connectors
Mixed Mono/Stereo Operation
3 Year Warranty when installed by an Authorized
PrecisionPower Dealer
Completely Designed And Handcrafted In The USA
S p e c i f i c a t i o n s
Power Bandwidth: 4.5 Hz - 100 kHz
Total Harmonic Distortion: 0.02 %
Input Topology: Differential
Input Sensitivity: 150mv - 12 volts RMS
Input Impedance: 10k Ohms
Load Impedance (stereo) 2 - 8 Ohms
Load Impedance (bridge) 4 - 8 Ohms
Supply Voltage 11 - 15 volts
Damping Factor >500
Slew Rate >50 V/
µ
S
Idle Current: PC4200 / PC4400 - 1.5 Amps
PC4800 - 3.0 Amps
PC6600 - 2.0 Amps
C o n t i n u o u s O u t p u t P o w e r
PC4200 PC6600
25 WRMS x 4 @ 4
Ω
per channel 50 WRMS x 6 @ 4
Ω
per channel
50 WRMS x 4 @ 2
Ω
per channel 100 WRMS x 6 @ 2
Ω
per channel
100 WRMS x 2 @ 4
Ω
bridged 200 WRMS x 3 @ 4
Ω
bridged
PC4400 PC4800
50 WRMS x 4 @ 4
Ω
per channel 100 WRMS x 4 @ 4
Ω
per channel
100 WRMS x 4 @ 2
Ω
per channel 200 WRMS x 4 @ 2
Ω
per channel
200 WRMS x 2 @ 4
Ω
bridged 400 WRMS x 2 @ 4
Ω
bridged
FEATURES / SPECIFICATIONS
1