Philips AS140 - Manual (Page 7)

6 EN
3 Get started
Always follow the instructions in this chapter in
sequence.
Connect power
Caution
‡ Risk of product damage! Ensure that the power voltage
corresponds to the voltage printed on the back or
underside of the device.
‡ Risk of electric shock! When you unplug the power
adapter, always pull the plug from the socket. Never
pull the cord.
Note
‡ The type plate is located on the bottom of the docking
system.
Connect the power adapter to:
‡
the DC IN socket of the docking system.
‡ the wall socket.
Turn on
Press .
» The docking system switches to the last
selected source.
Switch to standby mode
Press again to switch the docking system to
standby mode.
» [OFF] appears, and then the clock (if set) is
displayed.
Select a source
Press SOURCE repeatedly to select a source:
Bluetooth, FM tuner, or MP3 link.
Note
‡ When an android-powered device is docked, the
system automatically switches to Bluetooth mode.