Panasonic PV-V4524S User Manual

Page 7

Advertising

Table of Contents

Multi-Brand Control Feature ............................................ 2
Advanced Connections (Cable/DSS) .............................. 3
MTS Broadcast ................................................................ 4
VHS Hi-Fi Stereo System ................................................ 5
Tape Operation ............................................................ 6, 7
Before Requesting Service ............................................. 8
Copying Your Tapes (Dubbing) ...................................... 9
Special VCR Features .................................................. 10
On-Screen Displays (OSD) ........................................... 11

Reset Language, Channels, Clock, VCR’s Output Channel ..

Reset Language, Channels, Clock, VCR’s Output Channel

Press ACTION
to display MENU.

Language

1) Press

to select

language item.

For Spanish

For French

For English

Channels

2) Press

to select

“ANTENNA,” then
press to set
your antenna system
(“TV” or “CABLE.”)

• After Channel Auto

Set is finished, Auto
Clock Set will be
performed.

3) Press

to select

“AUTO SET,” then
press .

• If you use Cable

Box, set it to the
PBS channel in your
time zone.

Clock

2) Press

to select

“MANUAL,” and press

. (For Auto Clock Set,

select “AUTO CLOCK
SET.”)

(“TIME ZONE ADJUST”

appears only when
auto clock is set.)

3) Press

and

to select and set
the date, time, and
DST (Daylight
Saving Time).

4) Press ACTION to

start the Clock and
exit this mode.

and press to
subtract or add
hour(s) as necessary.

• “TIME ZONE

ADJUST” returns to
“0” if clock is set
manually.

VCR’s Output Channel

After 3 seconds

• To Make Corrections,

repeat steps 1) ~ 3).

SELECT :
EXIT : ACTION

SET:

SET UP VCR

SET UP CLOCK
SET UP CHANNEL
IDIOMA/LANGUE : ENGLISH
VCR’S OUTPUT CH: 3

ELEGIR :
SALIR : ACTION

FIJAR :

MENU
PREPARAR VCR
FIJAR RELOJ
FIJAR CANAL

LANGUE/LANGUAGE:ESPAÑOL

SALIDA DE VCR CANAL : 3

SEL. :
QUITTER : ACTION

REGLER:

MENU
REGLAGE MAGNETOSCOPE
REGLAGE HORLOGE
REGLAGE CANAL

LANGUAGE/IDIOMA:FRANÇAIS

CA SORTIE : 3

SELECT :
EXIT : ACTION

SET :

MENU
SET UP VCR
SET UP CLOCK
SET UP CHANNEL

IDIOMA/LANGUE : ENGLISH

VCR’S OUTPUT CH: 3

3) Press ACTION to exit.

1) Press

to select

“SET UP CHANNEL,”
and press .

1) Press

to select

“SET CLOCK,” and
press .

Time Zone
Adjust

1) Press

to select

“SET CLOCK,” and
press .

(Only when Auto Clock
is set.)

2) Press

to select

“TIME ZONE
ADJUST,”

3) Press ACTION.

Add or Delete a Channel

To add channel:
Select channel with NUMBER keys and
press ADD/DLT.

To delete channel:
Select channel with CH

/ or NUMBER

keys and press ADD/DLT.

DST (Daylight Saving Time)

VCR auto adjusts clock for DST.
Spring (First Sunday in April)
DST:ON

➛ Sets clock ahead one hour.

Autumn (Last Sunday in October)
DST:ON

➛ Turns clock back one hour.

• If your area does not observe Daylight

Saving Time, select DST:OFF.

• Keep these time changes in mind when

programming VCR for timer recordings.

1) Press

to select

“VCR’S OUTPUT CH.”

3) Press ACTION.

2) Press .

- 12 -

SELECT :
EXIT : ACTION

SET:

MENU
SET UP VCR
SET UP CLOCK

SET UP CHANNEL

IDIOMA/LANGUE : ENGLISH
VCR’S OUTPUT CH: 3

SELECT : SET :
EXIT : ACT I ON

ANTENNA

: CABLE

AUTO SET
WEAK S I GNAL D I SPLAY : OFF

SET UP CHANNEL

SELECT :
EXIT : ACTION

SET:

MENU
SET UP VCR

SET

CLOCK

SET UP CHANNEL
IDIOMA/LANGUE : ENGLISH
VCR’S OUTPUT CH: 3

AUTO CLOCK SET

MANUAL

T I ME ZONE ADJUST :

SELECT : SET :
EXIT : ACT I ON

SET CLOCK

AUTO CLOCK SET
MANUAL

T I ME ZONE ADJUST : 0

SELECT : SET :
EXIT : ACT I ON

SET CLOCK

SELECT :
EXIT : ACTION

SET:

MENU
SET UP VCR
SET UP CLOCK
SET UP CHANNEL
IDIOMA/LANGUE : ENGLISH

VCR’S OUTPUT CH: 3

IF YOU PRESS ACTION
KEY, VCR ’ S OUTPUT CH
SWITCHES TO CH 4.

PLEASE TUNE YOUR TV TO
CH 4.

CHANNEL 08 ADDED

CHANNEL 08 DELE TED

SELECT :
EXIT : ACTION

SET:

MENU
SET UP VCR

SET

CLOCK

SET UP CHANNEL
IDIOMA/LANGUE : ENGLISH
VCR’S OUTPUT CH: 3

On-Screen Displays (OSD)

VCR Status & Clock Displays

Function & Channel Displays

Blank Tape/
No Video Signal Indications

When blank tape is detected during play, or
the current channel has no signal (with Weak
Signal Display feature (p. 10) set to OFF), the
TV screen will turn solid blue.

CH 0 8

When a function button is
pressed, e.g. PLAY, or you
change channels,
a 5 second display
appears.

To display or remove
overlay at right,
➛ press DISPLAY*.

On-Screen Displays (OSD)

These displays will alert you to a missed operation or
provide further instructions.

OSD

Caution

Page

PLEASE SET CLOCK BY
PRESSING ACTION KEY

If you attempt to set or review a Timer
Recording and the Clock is not set...

After a Timer Program has been set...

If you press REC on the remote
control or VCR, and a cassette is
inserted with no record tab...

If you press PLAY, FF, REW, or REC on
the remote control or VCR without a
cassette inserted...

CHECK CASSETTE
RECORD TAB

NO CASSETTE

TURN VCR OFF
FOR TIMER RECORDING

If you press POWER or STOP during
a Timer Recording...
(visible in VCR mode only)

TO CANCEL TIMER REC
PRESS POWER THEN
STOP KEY

VIDEO HEADS MAY
NEED CLEANING
PLEASE INSERT HEAD
CLEANING CASSETTE
OR REFER TO MANUAL

END :PLAY

VCR LOCK ACTIVATED

If head cleaning becomes necessary
while playing back a tape...

If you press a function button other
than STOP/EJECT or POWER while
the VCR is in VCR Lock mode...

Warning and Instruction Displays

See page 6 of Basic
Operations book

See page 3 of Basic
Operations book

See page 5 of Basic
Operations book

See page 6 of Basic
Operations book

See page 3 of Basic
Operations book

See page 10

- 11 -

Special VCR Features

*Important:

If a remote control button does not work when pressed,
press the VCR button on the remote and try the button again.

- 10 -

Insert pre-recorded tape.

Insert blank tape with record tab.

Press REC, then PAUSE/SLOW immediately to
enter REC/PAUSE mode.

Press INPUT* to set VCR Input mode to LINE1
for Video Input (Rear) or to LINE2 for Video Input
(Front). (See “Selecting the Input Mode” below.)

Press PLAY to start dubbing.
Playing VCR starts playback.

Press PAUSE/SLOW to start dubbing.
Recording VCR starts recording.

Press STOP to stop dubbing.

To Monitor Dubbing on Your TV

Turn your TV on and tune to the Recording
VCR channel (CH3 or CH4).

Set the VCR/ TV Selector on the Recording
VCR to “VCR.”

• Dubbing tapes protected with Copy

Guard will have poor quality results.

Selecting the Input Mode

Method 1:
Press INPUT repeatedly.
Channel Number

↔

↔ LINE1 ↔

↔

↔ LINE2

Method 2:
Press CH

/ .

Display will change as below.

• “L1” or “L2” lights on Multi-Function Display

(about 4 sec.) when LINE1 or LINE2 is
selected.

• LINE1: For rear audio/video connection.

LINE2: For front audio/video connection.

Press STOP to stop dubbing.

Press PLAY, then PAUSE/SLOW
immediately to enter PLAY/PAUSE mode.

Connection

Playing (Source) VCR

Recording (Editing) VCR

Caution :

Unauthorized exchanging and/or copying of copyrighted recordings may be
copyright infringement.

- 9 -

(Rear connection shown.)

Note

125

LINE1

(CABLE)

(TV)

LINE2

Copying Your Tapes (Dubbing)

Before Requesting Service

Power

No power…

Recording & Playback

TV program cannot be recorded...

Timer recording cannot be
performed…

There is no playback picture, or the
playback picture is noisy or contains
streaks...

Special effects playback picture may
contain some vertical jitter when using
a TV with an Automatic Vertical Hold
Control...

VCR cannot be controlled...

Check the following points once again if you are having trouble with your VCR.

(BO : refers to “Basic Operations” Instruction book.)
(AO : refers to “Advanced Operations” Instruction book.)

Correction

• Completely insert Power Plug into an AC outlet.
• Press POWER button on.
• Make sure power source is active.

Miscellaneous

Programs cannot be viewed on TV...

Video cassette cannot be inserted...

Video cassette cannot be removed...

Video cassette ejects when a
recording is started or the power is
turned off for timer recording...

In Stop mode, the motor (CYLINDER)
continues to rotate...

Remote Control

VCR cannot be remote controlled...

ACTION and PROG buttons do not
respond...

If you cannot resolve the problem, please call the Customer Call Center for product
assistance at 1-800-211-PANA (7262).
To locate an authorized servicenter, please call toll free 1-800-211-PANA (7262).
or, contact us via the web at:http://www.panasonic.com/contactinfo

Correction

• Check connections between VCR, external antenna, and TV.
• Check connections selection. (BO p. 4, AO p. 3)
• Make sure your antenna system (CABLE or TV) is correctly

set. (Channels [AO p. 12])

• Make sure cassette record tab is intact. (BO p. 3)

• Confirm that clock is set to current time and date.
• Make sure Cable/DSS box (if used) is left on and tuned to

channel to be recorded.

• Set recording start/stop times correctly. (BO p. 6)
• Make sure VCR POWER button is pressed off. (BO p. 6)
• Timer recording may not be performed or continued if a power

interruption occurs before or during a Timer Recording, even
after power is restored.

• Select channel 3 or 4 on TV to match VCR output channel (3 or

4) (BO p. 4) or select LINE.

• Set VCR/TV selector to “VCR.”
• Adjust TRACKING control in either direction. (BO p. 3)
• Try Head Cleaning. (BO p. 3)

• Set TV’s Vertical Hold Control to MANUAL, then adjust.

• Make sure VCR power is on.
• Check Remote batteries.
• Make sure VCR LOCK is set to off. (AO p. 10)
• Make sure Timer Record is not in progress.

Panasonic Consumer Electronics Company,
Division of Matsushita Electric Corporation of America
One Panasonic Way Secaucus, New Jersey 07094

Panasonic Sales Company (“PSC”),
Division of Matsushita Electric of Puerto Rico, Inc.
Ave. 65 de Infantería. Km. 9.5 San Gabriel Industrial Park,
Carolina, Puerto Rico 00985

Correction

• Make sure VCR power is on.
• Make sure Remote is in VCR mode.
• Aim Remote Control directly at remote sensor on VCR. (BO p. 7)
• Avoid any object blocking signal path.
• Check Remote batteries. (BO p. 3)
• Make sure VCR LOCK is set to off. (AO p. 10)
• Exposing VCR remote sensor to direct fluorescent or outdoor

light may cause signal interference.

• Check connections between VCR, external antenna, and TV.
• Press VCR button for VCR mode. (AO p. 2)
• Check Remote batteries. (BO p. 3)

Correction

• Make sure TV power is on.
• Make sure TV is tuned to VCR's output channel (3 or 4).
• Check connections between VCR, external antenna, and TV.
• Set VCR/TV selector to “TV.” (BO p. 5, AO p.10)
• Make sure proper signal source is selected.

• Insert the cassette with window side up; record tab facing you.
• Check if a tape is already in the unit.

• Confirm Power Plug is fully inserted into an AC outlet.

• Make sure cassette record tab is intact. (BO p. 3)

• To enable Quick play mechanism, the cylinder will rotate for

about 5 minutes. This reduces response time from Stop to Play
mode and from Play to Rewind Search mode.

- 8 -

VCR CLOCK CHANNEL

CH AUTO SET PROCEEDING

CANCEL : STOP

CH AUTO SET PROCEEDING

CANCEL : STOP

REC

Front of VCR

(Front Audio L/R Video IN jacks
are also provided)

Connect VIDEO OUT jack on Playing VCR to VIDEO IN jack on Recording VCR.
To monitor the dubbing, also connect a TV as shown.

Connect AUDIO L/R OUT jacks on Playing VCR to AUDIO L/R IN jacks on Recording VCR.

In place of a Playing VCR, you can use other equipment, such as a Camcorder.
Simply connect the unit’s Audio/Video outputs to the Recording VCR.

VCR
(HiFi)

IN FROM ANT.

OUT TO TV

VIDEO OUT

AUDIO OUT

AUDIO IN

VIDEO IN

VHF/UHF

R
L

VCR
(HiFi)

VIDEO IN 2

L-AUDIO IN2-R

• For more on VCR/TV selection, see “Record one

station, watch another” and “Select channels on
VCR” sections (p. 5 of Basic Operations book).

The VCR/TV selection can be set to auto or
manual.

Press

to select

“AUTO VCR/TV,”
and press to set
“ON” or “OFF.”

Press ACTION to display MENU.

Press ACTION
to return to normal screen.

VCR/TV Selection Feature

SELECT :
EXIT : ACTION

SET:

SET UP VCR

SET UP CLOCK
SET UP CHANNEL
IDIOMA/LANGUE : ENGLISH
VCR’S OUTPUT CH: 3

REPEAT PLAY

OFF

AUTO SHUT-OFF

OFF

FRONT DISPLAY

AUTO VCR/TV

: ON

TAPE SELECT

T-120

SELECT : SET:
EXIT : ACT I ON

SET UP VCR

Press

to select

“SET UP VCR,”
and press .

• OFF(Manual): You select “VCR” or “TV” mode

using the VCR/TV button on the
unit or remote.

• ON(Auto):

“VCR” mode is automatically set
when VCR is turned on, or in Play
mode.

The power shuts off at a preset time.

SELECT :
EXIT : ACTION

SET:

SET UP VCR

SET UP CLOCK
SET UP CHANNEL
IDIOMA/LANGUE : ENGLISH
VCR’S OUTPUT CH: 3

Press

to select

“AUTO SHUT-OFF.”
Press repeatedly to
change shutoff time as
shown below.

Auto Shut-Off Feature

Press ACTION to display MENU.

• The shut-off countdown will not

function during Play or Record.

Note

REPEAT PLAY

: OFF

AUTO SHUT-OFF

: OFF

FRONT DISPLAY

: ON

AUTO VCR/TV

: ON

TAPE SELECT

: T-120

SELECT : SET:
EXIT : ACT I ON

SET UP VCR

Press

to select

“SET UP VCR,”
and press .

Press ACTION
to return to normal screen.

Note

When set to “ON,” picture is displayed regardless
of signal strength.

• ON : Picture is displayed even if signal

is very weak but quality may be poor.

OFF : Screen turns solid blue when signal

is weak or non-existent.

• Selecting “ON” has no effect on connected

equipment with blue back feature.

Press

to select

WEAK SIGNAL
DISPLAY, and press
to set “ON” or “OFF.”

Weak Signal Display ON/OFF Feature

Press ACTION to display MENU.

Press ACTION
to return to normal screen.

SELECT : SET:
EXIT : ACT I ON

ANTENNA : CABLE
AUTO SET

WEAK S I GNAL D I SPLAY:OFF

SET UP CHANNEL

SELECT :
EXIT : ACTION

SET:

MENU
SET UP VCR
SET UP CLOCK

SET UP CHANNEL

IDIOMA/LANGUE : ENGLISH
VCR’S OUTPUT CH: 3

Press

to select

“SET UP CHANNEL,”
and press .

Multi Function Display (Front Display) can be
set to ON/OFF.

• ON : When set to “ON,”

Multi Function Display is displayed
in Standby (OFF) mode.

OFF : When set to “OFF,”

Multi Function Display is not
displayed in Standby (OFF) mode.
If a Timer Program is set,
Multi Function Display is displayed.

Press

to select

“FRONT DISPLAY,”
and press to set
“ON” or “OFF.”

Multi Function Display
(Front Display) ON/OFF Feature

Press ACTION to display MENU.

Press ACTION
to return to normal screen.

REPEAT PLAY

: OFF

AUTO SHUT-OFF

: OFF

FRONT DISPLAY

: ON

AUTO VCR/TV

: ON

TAPE SELECT

: T-120

SELECT : SET:
EXIT : ACT I ON

SET UP VCR

Multi Function Display

(Front Display)

SELECT :
EXIT : ACTION

SET:

SET UP VCR

SET UP CLOCK
SET UP CHANNEL
IDIOMA/LANGUE : ENGLISH
VCR’S OUTPUT CH: 3

Press

to select

“SET UP VCR,”
and press .

2) Press repeatedly

to change language
item as shown below.

➡

SELECT :
EXIT : ACTION

SET :

MENU
SET UP VCR
SET UP CLOCK
SET UP CHANNEL

IDIOMA/LANGUE : ENGLISH

VCR’S OUTPUT CH: 3

Printed in Indonesia

LSQT0762 A

S1203-1014

When set to ON, all operations except for timer
record and tape eject are prohibited. Useful for
households with small children.

BLOQUEO DEL VCR:INACT

BLOQUEO DEL VCR:INACTIVO

VCR LOCK OFF

• VCR Lock cancels in 24 hours.

To turn on, hold down REC
on the VCR in Stop mode with
no tape inserted for 7 sec.
(Please ignore the NO
CASSETTE warning.)

To turn off, repeat above.

VCR Lock Feature

• Special

VCR

atur

es
• Cop

our

pes (Dub

bing)

• Bef

or
e Requesting Service

• Reset Language, Channels,

Clock,

ime Zone

Adjust,

VCR

’s Output Channel

• DST

• On-Scr

een Displays (OSD)

Video Cassette Recorder

Operating Instructions

(Advanced Operations)

For Basic operations, see the separate
“Basic Operations” instruction book.

Model No.

PV-V4524S

LSQT0762 A

Please read these instructions carefully before attempting to
connect, operate or adjust this product. Please save this manual.

The operation of steps 4 and 5 must be done on both playing
and recording VCRs at the same time.

REC 1 2 : 0 0AM
0 : 25

CH 02

-0 : 1 2 : 3 4

STEREO
SAP
MONO

Function Status

Rec Time Remaining

(OTR mode only.
See p. 5 of Basic
Operations book.)

Current Time

Channel

Tape Speed

(See p. 3 of Basic

Operations book.)

Broadcast Audio
Being Received

Counter

*Important:

If a remote control button does not work when pressed,
press the VCR button on the remote and try the button again.

For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo

As an

NERGY

TAR

Partner, Matsushita Electric Corporation

of America has determined that this product or product model
meets the

NERGY

TAR

guidelines for energy efficiency.

DST : ON

11/21/2004 SUN

12:00PM

- - - - - - - - -- - - - - - - -- - - - - -

SET CLOCK

SELECT : SET :
END

: ACT I ON

SELECT :
EXIT : ACTION

SET:

SET UP VCR

SET UP CLOCK
SET UP CHANNEL
IDIOMA/LANGUE : ENGLISH
VCR’S OUTPUT CH: 4

PV-V4524S Advanced-1 (040127).p65

2004/01/27, 12:27

LSQT0762A (Advanced Operation)NEW - Front

Advertising

Popular Brands

Popular manuals