Panasonic P2HD AJ-HRW10G - Manual (Page 39)

39
System setting (continued)
Specifying copy options (Copy Setting)
Set the option functions in copying.
A
B
C
D
E
A Verify
Compare source and destination data after copying
is finished.
● ON button
Compare data.
● OFF button
Do not compare data.
B Card Check
Check whether the same status applies to the data
on the P2 card which has been inserted as that for
the data copied onto the HDD.
If any changes have been made to a copied P2
card such as when data has added or deleted, the
card will not be treated as a copied card.
● ON button / OFF button
Set the CARD CHECK function to Activate (ON)
or Deactivate (OFF).
C Automatic COPY
This function will automatically copy inserted P2
cards.
● ON button / OFF button
Set the AUTO COPY function to Activate (ON) or
Deactivate (OFF).
● Destination HDD button
Set the destination for AUTO COPY.
“Destination HDD” will be displayed as “RAID1”
when in RAID1 mode.
D DEFAULT VALUE button
Restore [Copy Setting] screen settings only to
factory settings.
E CLOSE button
Return to the main screen.
Changing thumbnail display (Thumbnail)
Specify how the thumbnail screen is organized for clips
shown on the "EXPLORE" screen.
A B C D
A 3×2 button
The thumbnails are displayed in three rows on two
levels.
B 4×3 button
The thumbnails are displayed in four rows on three
levels.
C 5×4 button
The thumbnails are displayed in five rows on four
levels.
D CLOSE button
Return to the main screen.