Pure Digital VX4600 - Manual (Page 23)

43
VX4600
42
VX4600
Editing Stored Phone Numbers
1. From standby mode, press Right Soft Key
Contacts.
Your Contacts display alphabetically.
2. Use to highlight the Contact entry you
want to edit, then press .
3. Press Left Soft Key Edit.
4. Use to highlight the phone number and
press .
5. Use to highlight the phone number and
press .
6. Edit the phone number as necessary and
press .
Editing Stored Names
1. From standby mode, press Right Soft Key
Contacts.
Your Contacts display alphabetically.
2. Use to highlight the Contact entry you
want to edit, then press .
3. Press Left Soft Key Edit.
4. Use to highlight the name and press .
5. Edit the name as necessary and press .
Contacts in Y Contacts in Y our Phone’ our Phone’ s Memor s Memor y y
Default Numbers
The phone number saved when a Contact is
created is the Default Number. If more than one
number is saved in a Contact entry, another
number can be saved as the Default Number.
Changing the Default Number
1. From standby mode, press Right Soft Key
Contacts.
Your Contacts display alphabetically.
2. Use to highlight the Contact entry you
want to edit, then press .
3. Press Left Soft Key Edit.
4. Use to highlight the phone number you
want to set as the Default Number and press
Right Soft Key
Options.
5. Press Set as Default #.
A confirmation message is displayed.
NOTE: The Default Number cannot be deleted by
itself. The entire Contact entry can be
deleted or another number can be set as the
Default Number allowing you to delete the
original saved number and keep the Contact
entry.
VX4600-(E) 111.QXD 04/1/27 10:28 AM Page 42