PYLE Audio PLE702B - Manual (Page 15)

13
• Never drive with the volume raised so high you
cannot hear what is occuring in traffic around you.
• Be aware that repeated exposure to excessive
volume levels can permanently damage your hearing!
• Keep all electronics away from moisture, dust,
extreme heat or extreme vibrations.
• Pyle Audio products are capable of sound pressure
levels in excess of 150 dB. Continuous exposure
to sound pressure levels over 100 dB may cause
permanent loss of hearing. Use common sense and
PRACTICE SAFE SOUND.
troubleshooting
P L E 7 0 2
B
• P L E 7 5 5
S
precautions
If you experience...
Signal Processor does not turn on. Check that:
• Remote Turn-On wire has 12V.
• 12V wire has 12V.
• Ground wire is properly connected.
Level of sound is low. Check that:
• Wiring is not loose or cables misconnected/disconnected.
• RCA cables are not faulty.
Background noise is too high. Check that:
• Wiring is not loose or cables misconnected/disconnected.
• RCA cables are not faulty.