Panasonic DMP-BD50 - Manual (Page 9)

9
RQT9184
(ENG)
Firmware updating
Network connection
With LAN
By connecting the unit to broadband Internet, you can use a disc that offers BD-Live
function. (
> 16)
This connection also allows you to automatically check for the latest firmware version.
(
B below)
NOTE
pAfter connecting to the Internet, perform
necessary settings. ( > 12)
pInserting any cable other than a LAN cable
in the LAN terminal can damage the unit.
AC IN
AV OUT
FRONT R /R VIDEO OUT S VIDEO OUT OPTICAL
COAXIAL FRONT L /L
SUBWOOFER
CENTER SURROUND
AUDIO OUT COMPONENT VIDEO OUT DIGITAL AUDIO OUT (PCM/BITSTREAM)
2ch 5.1ch
Y P B
P R
L
R
L
R
Please
connect
directly
to TV.
LAN
10BASE-T/ 100BASE-TX
pWhen your communication equipment (modem), etc. has no
broadband router functions: Connect a broadband router.
When your communication equipment (modem), etc. has broadband
router functions but there are no vacant ports: Connect a hub.
pUse a router that supports 10BASE-T/100BASE-TX. Telecommunications
equipment (modem, etc.)
Straight LAN cable (not included)
Hub or broadband router
Back of the unit
Internet
When this unit remains connected to the Internet, it will automatically check for the
latest firmware version when it is turned on.
When latest firmware version is available, the following screen is displayed.
Select “Yes” or “No”.
pIf “Yes” is selected, then follow the on-screen instructions.
pIf “No” is selected, then manually update the firmware later. (B right)
After the latest firmware is downloaded, the system will be restarted and the firmware
will be updated.
When the system is restarted, the screen display disappears
and “START” is displayed on the unit’s display.
After the firmware is updated and the system is restarted, the following screen
indicates that the firmware update has been completed.
pDuring the update process, no other operations can be performed. Serious damage
may occur if you turn the power off and/or press any buttons.
NOTE
TIPS
pDownloading will require several minutes. It
may take longer or the Internet may not be
connected depending on the connection
environment. It is required that you use a
broadband connection.
pIf downloading on this unit fails or this unit is
not connected to the Internet, then you can
download the latest firmware from the
following website and burn it to a CD-R to
update the firmware.
http://panasonic.net/support/
pWhen the unit is connected to the Internet,
communication charges may be generated.
pIf you do not want to check for the latest
firmware version when the unit is turned on,
set “Automatic Update” to “Off”. (
> 29)
Manually updating the firmware
If the firmware update is not carried out when
the unit is turned on, a message is displayed
when displaying the FUNCTIONS menu.
You can manually update the firmware.
1) Press [SETUP].
2) Press [
, ] to select “Others” and press
[OK].
3) Press [ , ] to select “Firmware Update”
and press [OK].
4) Press [ , ] to select “Update Now” and
press [OK].
5) Press [ , ] to select “Yes” and press
[OK].
Firmware Update
New firmware is available.
Current Installed Version: x.x
Latest Online Version: x.x
Do you want to start firmware update?
Yes No
Firmware Update
The firmware was updated.
Current version: x.x
New firmware version available.
Please update from Setup.
G
e
tt
in
g
s
tar
ted