Phase Technology Outdoor/In-Ground Speaker XT610 - Manual (Page 2)

Enclosure Technology
XT enclosures are engineered for maxi-
mum durability and performance. Unlike
other outdoor speakers, SoundTubes incor-
porate patented ZeroReflection™ internal
shaping to create the most effective envi-
ronment for sound reproduction. The result
is accurate sound and tight bass in
an indestructible enclosure.
Te Technical Data Data
SoundTube Entertainment strives to pro-
vide complete and effective technical infor-
mation and data to dealers, engineers and
designers. All data are available from
SoundTube Entertainment or at
www.soundtube.com.
Technical data and downloads include:
Tech Sheets – Technical information and
architectural specs for system engineers.
Data Acquisition
All performance data acquired at
SoundTube’s Technical Measurement Center
(TMC) are analyzed using standardized mea-
surement techniques, including Measured
Length Sequence (MLS) and Time Delay
Spectrometry (TDS). Performance, develop-
ment, and data acquisition tools include:
Gold Line TEF20 Suite, CLIO, LMS, LEAP,
and proprietary modeling software.
Data for Other SoundTube
Products
Also available: Sales & installation infor-
mation for all SoundTube speaker systems,
including open-ceiling, in-ceiling, surface-
mount, in-ground and sound-focusing
speakers.
Architectural Specifications
The loudspeaker shall be of in-ground
design consisting of one 130 mm (5.25 in)
low-frequency transducer and one 25 mm
(1.0 in) silk dome high-frequency trans-
ducer with a frequency-dividing network
installed in a vented enclosure. The low-
frequency voice coil diameter shall be 25
mm (1.0 in).
Performance specifications of a typical
production unit shall be as follows: Usable
frequency response shall extend from
60 Hz – 20 kHz. The loudspeaker shall be
available in separate 32W transformer and
4 Ohm models. Taps shall be nominally 4 W
Technical data, EASE ™ plots, SoundTubeSPEC ™ software & product downloads available at www.soundtube.com
XT610 XT610 Outdoor/In-Ground Speaker
Technical Information for System Engineers
110.0
100.0
dBSPL
90.0
80.0
70.0
60.0
30 100 1K 10K Hz 20K
-180.0
-108.0
-36.0
36.0
108.0
Deg
180.0
Half space (2 p)
2 p simulates mounted or in-ground applications.
50.0
40.0
Ohm
30.0
20.0
10.0
0.0
20 100 1K 10K Hz 20K
-180.0
-108.0
-36.0
36.0
108.0
Deg
180.0
Impedance
Phase
Phase/Impedance Reponse
Frequency Response