Pioneer VSX-D811S - Manual (Page 28)

Controls and Displays 04
28
En
2 DIGITAL
Lights when a Dolby Digital signal is
detected.
ANALOG
Lights when an analog signal is detected.
DTS
Lights when a source with DTS audio
signals is detected.
2 DTS
When the Standard mode of the receiver is on,
this lights to indicate decoding of a DTS signal.
3 2 DIGITAL
When the Standard mode of the receiver is on,
this lights to indicate decoding of a Dolby
Digital signal.
4 2 PRO LOGIC II
When the Standard mode of the receiver is on,
this lights to indicate Pro Logic II decoding.
5 ATT
Lights when INPUT ATT is used to attenuate
(reduce) the level of the analog input signal.
6 DIRECT
Lights when source direct playback is in use.
This function bypasses all tone, balance,
Advanced surround, and Dolby Surround
effects.
7 MIDNIGHT
Lights during Midnight listening.
8 MONITOR
Lights when MONITOR is selected (page 48).
9 Speaker indicator
Shows the speaker system currently in use.
10 Character display
11 Neo:6 (VSX-D811S)
Lights during NEO:6 processing
12 ADV. SURR (Advanced Surround)
Lights when one of the Advanced Surround
modes has been selected.
13 LOUDNESS
Lights when LOUDNESS has been selected.
14 TUNER indicators
STEREO:
Lights when a stereo FM broadcast is being
received in auto stereo mode.
MONO:
Lights when the mono mode is set using the
MPX button.
TUNED:
Lights when a broadcast is being received.
15 Master volume level
Shows the overall volume level. ---dB indicates
the minimum level, and −−−−− 0 dB indicates the
maximum level.
Depending on your level settings for each
channel, the maximum level can range between
–10 dB and –0 dB.
XRB3013A.26.31 01.12.12, 4:43 PM 28