Pelco PMCS17A - Manual (Page 6)

[ 6 ]
Pelco Manual C1991M-C (9/04)
OPERATION
1. Set the video format switch located on the front panel to one of the following settings:
VIDEO1 - Composite video (NTSC/PAL) mode
VIDEO2 - Composite video (NTSC/PAL) mode for two, video input operation
S-VIDEO - S-VHS mode if the S-VHS input jack on the back of the monitor is used
2. If required adjust the picture using the control knobs on the front panel.
Front Panel Adjustments
TINT
Color phase adjustment. Turn clockwise to increase the greenish tones in the picture.
Turn counterclockwise to increase the reddish tones in the picture.
COLOR Color saturation level. Turn the control knob clockwise to increase the saturation level
and counterclockwise to decrease the saturation level.
CONT Contrast adjustment. Proper adjustment will allow maximum gradations between the
darkest and lightest picture contrast. Turn the control clockwise to increase picture con-
trast and counterclockwise to decrease contrast.
BRIGHT Brightness display adjustment. Turn the control clockwise to increase brightness and
counterclockwise to decrease brightness.
SHARP Sharpness adjustment. Adjust control knob to obtain the clearest picture.
VOLUME Audio adjustment. Turn the control clockwise to increase volume and counterclockwise
to decrease volume.
MAINTENANCE
If the quality of the picture is poor and cannot be improved by making adjustments on the front control
panel, inspect all system connections and cable runs.
To reduce the risk of electrical shock, do not remove the cover or back of monitor. No user-serviceable
parts are inside. Refer servicing to qualified personnel, or contact the Pelco Customer Service Depart-
ment for assistance. Refer to the Warranty and Return Information section.