Pioneer SUPERTUNERD DEH-P5200HD - Manual (Page 18)

Advanced operations using
special buttons
Selecting the XM channel select mode
1 Press S.Rtrv/SAT to cycle between:
CH number (channel number select setting)
—
Category (channel category select setting)
Function and operation
1 Press M.C. to display the main menu.
2 Use M.C. to select FUNCTION.
The function selection menu is displayed.
Turn to change the menu option. Press to
select.
CH select (channel select mode setting)
You have two methods for selecting a channel: by
number and by category. When selecting by number,
channels in any category can be selected. Select by
category to narrow your search down to only chan-
nels in a particular category.
1 Press M.C. to display the setting mode.
2 Turn M.C. to select the desired setting.
CH number (channel number select setting)
—
Category (channel category select setting)
Note
Operation is complete even if the menu is can-
celled before being confirmed.
Selecting a channel in the
channel category
1 Switch the channel select settings to
Category.
Refer to Selecting the XM channel select mode
on this page or
CH select (channel select
mode setting) on this page.
2 Push M.C. up or down to select the de-
sired channel category.
3 Push M.C. left or right to select the de-
sired channel in the selected channel
category.
Displaying the Radio ID
1 Select the channel select settings to
CH number.
Refer to Selecting the XM channel select mode
on this page or
CH select (channel select
mode setting) on this page.
2 Push M.C. left or right to select
RADIO ID.
# If you select another channel, display of the ID
code is canceled.
# Display of the ID code repeats displaying
RADIO ID and the ID code one after the other.
SIRIUS Satellite Radio tuner
You can use this unit to control a SIRIUS Satel-
lite Radio tuner, which is sold separately.
When the SIRIUS tuner is used together with
this unit, some operations differ slightly from
those described in the SIRIUS operation man-
ual. This manual provides information on
these points. For all other information on
using the SIRIUS tuner, please refer to the SIR-
IUS operation manual.
Listening to SIRIUS Satellite Radio
Select a SIRIUS band.
1 Press BAND/ESC.
! Band can be selected from SR1, SR2 or SR3.
Select a channel.
1 Push M.C. left or right.
! If you push and hold M.C. left or right, you
can increase or decrease channel number
continuously.
! You can also perform tuning from a desired
channel category. (Refer to Selecting a chan-
nel in the channel category on page 20.)
En
18
Section
03 Available accessories