Setting your id number (fax telephone number), Installing your machine, User parameters for fax – Panasonic DP-150FX User Manual
Page 24
INSTALLING YOUR MACHINE
24
Setting Your ID Number (Fax Telephone Number)
(see Note 1)
(see Note 2)
If the remote machine does not have a Character ID but it
has an ID Number, when sending or receiving, your ID
Number will appear on the remote machine's display and
their ID Number will appear on your display.
We suggest you use your facsimile telephone number as
your ID number. (max. 20 digits)
Make sure that the FAX lamp is ON. If not, press
to select the "FAX MODE".
1
2
3
repeatedly until display shows;
4
Enter your ID (max. 20 digits) by using the keypad and
.
Ex:
If you make a mistake, use
or
to move the cursor
beyond the incorrect number, press
then re-enter the new number.
5
NOTE
1. You may use
to enter a "+" character at the beginning of the ID number to indicate the following digit(s) for
your country code.
Ex :+1 201 555 1212
+1 for U.S.A. country code.
+81 3 111 2345
+81 for Japan country code.
2. Your Fax Telephone Number must be set as your ID Number because it is required by the Telephone Consumer
Act of 1991. (For details, see FCC NOTICE at the end of this Operating Instructions)
1
2
4
5
7
8
0
3
6
9
abc..
+
-
FUNCTION
SET
7
1
FAX
FAX
FUNCTION
7
SET MODE (1-6)
ENTER NO. OR
∨
∧
1
1:USER PARAMETERS?
PRESS SET TO SELECT
SET
ID NO.
❚
MONITOR
2
0
1 MONITOR
5
5
5
MONITOR
1
2
1
2
CLEAR/STOP
ID NO.
201 555 1212
❚
SET
RESET
User Parameters for Fax