Panasonic VQT9958 - Manual (Page 50)

50 (E)
CONTENTS
Setup menus
The underlined items indicates the initial setting.
USER menu <V BLANK>
No./Item Description No./Item Description
800
ADD LINE 25
00
REC LINE1
Sub-screen
For selecting the mode for recording signals
on additional lines.
0000 OFF : No signals are recorded on
additional lines.
0001 YC422 : The 422 mode signals are
recorded on 1 line.
0002 YC411 : The 411 mode signals are
recorded on 1 line.
0003 Y1_B/W : Only the Y signal is recorded on
1 line directly.
0004 Y1_BPF : Only the Y signal is recorded on
1 line after it has been separated
from the C signal.
0005 C1 : Only the C signal is recorded on
1 line.
0006 Y2_B/W : Only the Y signal is recorded on
2 lines directly.
0007 Y2_BPF : Only the Y signal is recorded on
2 lines after it has been
separated from the C signal.
0008 C2 : Only the C signal is recorded on
2 lines.
<Notes>
O When a setting from “0001 (YC422)” to “0008
(C2)” is selected and the STOP button is
pressed, operation transfers to the sub-screen,
and the recording line or lines can be selected.
To return from the sub-screen, press the STOP
button again.
O The setting takes effect when the system
format is 25 Mbps.
For selecting the additional line where the
signals are to be recorded.
0000 7L
: :
0015 22L
0016 320L
: :
0031 335L
0032 623L
801
ADD LINE 50
00
REC LINE1
Sub-screen
For selecting the mode for recording signals
on additional lines.
0000 OFF : No signals are recorded on
additional lines.
0001 YC422 : The 422 mode signals are
recorded on 2 lines.
0002 Y4_B/W : Only the Y signal is recorded on
4 lines directly.
0003 Y4_BPF : Only the Y signal is recorded on
4 lines after it has been
separated from the C signal.
0004 C4 : Only the C signal is recorded on
4 lines.
<Notes>
O When a setting from “0001 (YC422)” to “0004
(C4)” is selected and the STOP button is
pressed, operation transfers to the sub-screen,
and the recording lines can be selected.
To return from the sub-screen, press the STOP
button again.
O The setting takes effect when the system
format is 50 Mbps.
For selecting the additional line where the
signals are to be recorded.
0000 7L : :
: : 0031 335L
0015 22L 0032 623L
0016 320L
01
REC LINE2 For selecting the additional line where the
signals are to be recorded.
0000 7L 0018 322L
: : : :
0015 22L 0031 335L
0016 320L 0032 623L
: :
02
REC LINE3 For selecting the additional line where the
signals are to be recorded.
0000 7L : :
: : 0031 335L
0003 10L 0032 623L
: :
0015 22L
0016 320L
<Note>
This menu item is not displayed
when setting “1” has been
selected as the additional line
mode.
03
REC LINE4 For selecting the additional line where the
signals are to be recorded.
0000 7L : :
: : 0031 335L
0015 22L 0032 623L
0016 320L
: :
0019 323L
<Note>
This menu item is not displayed
when setting “1” has been
selected as the additional line
mode.
01
REC LINE2 For selecting the additional line where the
signals are to be recorded.
0000 7L
: :
0015 22L
0016 320L
: :
0018 322L
: :
0031 335L
0032 623L
<Note>
This menu item is not displayed
when additional line mode
setting “1” through “5” has been
selected.