Panasonic BT-LH900A - Manual (Page 27)

No. Command Explanation Data Response
27
12 QAS Aspect 0: 16:9 1: 4:3
O Outputs the aspect mode of the images now
displayed on the screen.
13 QSF Format settings SD1 : SDI1 00: AUTO 01: 1080/60I
03: 1080/50I 04: 1080/30P
06: 1080/25P 07: 1080/24P
09: 1080/24PsF 11: 1035/60I
13: 720/60P 15: 720/60P ANAMO
17: 576/50I 19: 480/60I
23: 720/50P
SD2 : SDI2 The same as the abobe
VBS : VIDEO 00: AUTO 01: NTSC 02: PAL
ANA : YP B P R /RGB 00: AUTO 01: 1080/60I
03: 1080/50I 04: 1080/30P
06: 1080/25P 07: 1080/24P
09: 1080/24PsF 11: 1035/60I
13: 720/60P 17: 576/50I
18: 480/60P 19: 480/60I
23: 720/50P
20 QFR Input signals format 01: 1080/60I 02: 1080/59I
03: 1080/50I 04: 1080/30P
05: 1080/29P 06: 1080/25P
07: 1080/24P 08: 1080/23P
09: 1080/24PsF 10: 1080/23PsF
11: 1035/60I 12: 1035/59I
13: 720/60P 14: 720/59P
15: 576/50I (PAL) 16: 480/60P
17: 480/60I (NTSC) 23: 720/50P
00: No signals FF: Not supported signals
O
Outputs the input signal format of the images now
displayed on the screen.
14 QAN Analog mode 0: YP B P R 1: RGB
15 QSY RGB sync 0: G-ON 1: EXT
18 QBA Remaining battery
charge 000-100 (%)
O Outputs the remaining battery charge as “000” when
a battery other than an Anton/Bauer digital battery is
used.
19 QCR CRCC error 0: NORMAL 1: ERROR
17 QCL Component level 0: SMPTE 1: B75
16 QBL Total operation time
of the backlight 00000-99999 (Hour)
REMOTE specifications
(continued)