Pico Macom MPC-12R - Manual (Page 5)

MPC-12R
Specifications
5
Rev. 07/06
Ph:800-421-6511 www.picomacom.com
Universal Chassis and Hot-Swappable Redundant Power Supply
MPC-HSS
®
MPC-HSS
®
Front View
Rear View MPC-BP
Cover
Plate
Input Voltage Range: 90 to 264 VAC
Frequency Range: 47 to 63 Hz
Output Specifications: V1: 5 VDC/4 A
V2: 12 VDC/3.5 A
V3: 30 VDC/.27 A
Efficiency: >75% typical
Operating Frequency: 100 kHz
Input Inrush Current: <30 A @ 115 VAC @ 25° C
Line Protection: PCB AC line fuse
DC Output Ripple: Within 1% (Vpp) at maximum
load @ 25° C @ PS output
terminal
Line/Load Regulation: ±1%
Minimum Load: 10% of full rated load
Operating Temperature Range: 0° to 60° C
Storage Temperature Range: -40° to 85° C
Overcurrent Protection: No damage to outputs when
shorted to ground
Input (on back plane): IEC 320 inlet connector
Output (on back plane/
each connector):
12 Pin: Pins 1,5,9 - 5 VDC
Pins 2,6,10 - 12 VDC
Pins 3,7,11 - Ground
Pins 4,8,12 - 30 VDC
4 Pin: Pins 1 - 5 VDC
Pins 2 - 12 VDC
Pins 3 - Ground
Pins 4 - 30 VDC
Dimensions: 19˝(L) x 7 1 / 2 ˝(D) x 3 1 / 2 ˝(H)
Weight: 7.8 lbs.
Power Supply Connectors
Chassis
MPC-12R 12-Mini-Mod Chassis and Redundant Power
Supply System Chassis Equipped with
2-Hot-Swap Modules, Backplane-Bracket,
and Wire Harness
MPC-HSR Redundant Power Supply Upgrade Kit for
MPC12 System Consists of 2-Hot-Swap
Modules, Backplane-Bracket, and Wire
Harness
MPC-HSS Replacement Single Power Supply Module
MPC-12C Universal Chassis (chassis only)
MPC-BP Blank Cover Plate
Ordering Information
MPC12R.qxd 7/7/06 10:46 AM Page 5