Pentax 40 MZ-3i - Manual (Page 33)

61
16. Technical Data 16. Technical Data
60
Table 7: Recycling times and number of flashes with different battery types
Battery types Recycling times Number of flashes
M-Mode / A-TTL-Modes min. / max.
High-power, 10 sec. 0.1 . . 10 sec. 100 / 3000
alkaline-manganese
Lithium 11 sec. 0.1 . . .11 sec. 200 / 5000
NiCad 0 5 sec. 0.1 . . . 0 5 sec. 0 60 / 1200
700 mAh
NiMh 0 5 sec. 0.1 . . . 0 5 sec. 100 / /2000
1200 mAh
Power Pack P 40 0 5 sec. 0.1 . . . 0 5 sec. 160 / 3200
Power Grip
G 15/16 with
10 sec. 0.1 . . .10 sec. 210 / 4200
alk.-mang. batt.
Power Grip
G 15/16 with
0 5 sec. 0.1 . . . 0 5 sec. 160 / 3200
NiCad batt.
1800 mAh
Guide numbers at ISO 100/21°: see Table 4
12 auto apertures at ISO 100/21°:
f/1, f/1.4, f/2, f/2.8, f/4, f/5.6, f/8, f/11, f/16, f/22, f/32, f/45
Flash durations: •approx. 1/200...1/20,000 sec. in A and TTL modes
•approx. 1/200 sec. in M mode at full light output
Sensor measuring angle: approx. 25°
Colour temperature: approx. 5600 K
Film speed: ISO 6 to ISO 6400
Synchronisation: low-voltage ignition
Number of flashes p. battery charge: 60 at full light output
Swivel/tilt range and lock-in positions of zoom reflector:
upwards: 60° 75° 90°
downwards: -5° -13°
anti-clockwise 75° 90°
clockwise 75° 90° 180°
Dimensions (w x h x d), approx. 83 x 82 x 123 mm
Weight with SCA adapter and batteries: approx. 540 g
Included:
Flashgun, Standard Foot 301 (not with „Sets“), cover plate (not with „Sets“),
operating instructions, operating instructions for SCA 300/3000 Adapters.
Flashgun Sets are supplied with the corresponding SCA adapter instead of the
Standard Foot 301 and cover plate.