Palsonic DVD5000 - Manual (Page 16)

Preparation before playing:
1. Connect your DVD player to the TV set and amplifier.
2. Turn on the TV set, and select the AV input to the channel you have connected.
3. Turn down the amplifier volume and turn on the power of amplifier, then select
the Audio input to the channel you have connected.
After the preparation, you use the DVD player and enjoy the program as following:
work. Then "LOAD" is illumi-
"open" on the VFD. When the tray is
open, please put the disc on the tray,
which letter side of disc should be
3. Thirdly, press PLAY but-
ton either on the front panel
or remote controller, and the
tray closes. The player will
automatically read and
identify the disc. Then the
player will display the type
and total time of the disc on
the VFD, and begin to play.
Basic Playback
Basic Operation
2. Secondly, press OPEN/CLOSE
button either on front panel or re-
mote controller. The player displays
up.
-15-
is displayed on TV screen
nated on the VFD and the logo
switch, the player will start to
1. Firstly, press the power